4 Link Kit with 1.25" Heims, Tube Chassis
NOTE: These kits are made from our standard brackets and tabs which use 9/16" bolts. They will have to be drilled out to 5/8" to use with the rod ends in kit.This is it, everything in one package for a great price, and not low end stuff just to be cheap either! The kit is wrapped around 8 of our 1.25" Heat & Cryo Treated Chromoly Heims with Stainless High Misalignment, Zinc Plated Jam nuts, and 1.5" Tube ID Weld Bungs. Not a low end cartridge type joint. The Upper Chassis brackets are our 10-35 Degree 5 Way Adjustable Tube Mount Link brackets. The Lower Chassis brackets are 10-35 Degree 3 way Adjustable Tube Mount Link brackets for optimum performance. For the axle end we have our Axle Mount Link brackets and our New Truss that we have refined for more strength while shedding unneeded pounds.
On the Truss we keep it simple with 4 of our 3/8" thick Flat Bottomed Link Tabs. The only choice you need to make is if the Truss needs to span a Large third member (D60, D70, Sterling, Eaton, Dodge 9.75, etc...) or a Medium sized third member (Ford 8.8, D44, Ford 9", Toyota, etc...). If you want to make more changes give us a call and we can see what we can do!
Write an online review and share your thoughts with others.
Customers who purchased this product, also purchased:
|Horizontal 4 Link Bracket, Axle End||$59.00|
|1.25" Rod End Set 1.5" Tube ID||$129.00|
|5 Hole Gusset||$4.85|
|Adjustable Buggy Link Tabs (Lower)||$58.00|
|3.0 Short Link Tab||$4.55|