Antiwrap / Radius Arm / Traction Bar Main Plates
Anti-wrap, Radius Arm and Traction Bar Main plates are designed to be welded to the axle tube and provide the attachment point for the upper and lower arms of the Anti-wrap Bars, Radius Arm,or Traction Bar mounts . They are made from 3/8" thick plate and come with 9/16" bolt holes. The three top holes are set at 6", 7", or 8" from the axle center line for easy adjust ability and fitment. The Anti-wrap bar will be the most effective using the highest hole but clearances may require the use of the lower holes. The plate is cut for 3" axle tube but can easily be opened to 3.5" or more with a little grinding.
Sold in pairs
Write a review
Customers who purchased this product, also purchased:
|Bushed DOM Sleeve|
|Baby Shackle 2.5"|
|1.25" Rod End Set 1.5" Tube ID|