Steering Kit RZR XP 1000 & 1000 Turbo (Campbell Series)
Note: There are special editions and models that can be an exception to which steering kit will fit. We have found when the inner tie rod is removed the threads will either be 14mm (.55) or 16mm (.62). Be sure to check this to verify which kit will work for you.
Inspired by the King Of The Hammers UTV Race, when the Campbell Team purchased aftermarket steering kitís for the three competing carís and by the end of the race all three RZR's had bent tie rods, which could have possibly cost them the race. This kit is designed by Shannon Campbell, and rigorously test by Shannon, Wayland and Bailey. This steering kit is specifically designed to take the abuse of off-road racing so you can be confident it will not fail you out on the trail or sand dunes.
Constructed from 6061 aluminium hex, tapered down toward the chassis with a 3/4" Heated Chromoly Rod End and held together with a 300M tapered stud to attach to the knuckle.
Write a review
Customers who purchased this product, also purchased:
|Lower A Arm Kit RZR XP 1000 (Campbell Series)|
|Lower Radius Rod RZR XP 1000 (Campbell Series)|
|RZR XP 1000 Suspension Kit|
|Radius Rod Bolt Plate XP 1000 Non-Turbo|