SKU: R1017-A 14 Bolt Disc Brake Bracket Pair for Single Rear Wheels (SRW)
NOTE: Fits 73-87 single rear wheel full float 14 bolt housings. Requires steel wheel 15" with a maximum 4" back spacing
Our full float 14 Bolt Disc Brake Brackets are bent, eliminating spacers therefore making them stronger and slightly lighter as well.
All of our brackets are 3/8" thick for strength and rigidity and it costs us less to make which we can pass on to you the customer.
These will only work on 73-87 axle, the newer axles are hit and miss. To double check, measure from the 4 bolt mounting flange to the surface the wheel studs press up against (back of hub) should be about 4 11/16". Chevy Calipers & Rotors not included. These make the 14 bolt Disc Brake Conversion easy!
These, like all of our Disc Brake Brackets are sold in pairs.
*NOTE* If longer studs are needed, usually dually studs are long enough. Double check stud diameter, studs should drop freely into the rotor. DO NOT press studs into the rotor. If your hub has too large of studs you will need to drill the rotors to accept them. Be sure to have minimum 5/8" lug nut thread engagement once the wheel is installed
*NOTE* This is for Full Float axles only, does not work on Semi Float NAPA Part numbers for 73-87 3/4 Ton Front, 4x4, Chevy Calipers and Rotors:
Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers Rotor Only - 4885677 - all years Brake line-H86572