SKU: R1629 RuffStuff 7/8" Heim Steering Kit *NO TUBE*
This is your not so basic steering setup that uses 7/8" heims with easier adjustment. This version of our 7/8" heim steering kit is for those who need replacement heims or have a local tube supplier and want to save money on shipping. The kit can be used with stock steering position on the knuckle or High Steer arms. The arms or knuckles would need a 3/4" bore.The adjustment is easier because we add Hex Head weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench which will scar the tube and if too deep cause a major stress riser. Not to mention what it does to the paint...
We do not provide the 3/4" bolts you will need. You must determine the length you need and it will vary with the thickness of your High Steer arm & Pitman Arm.We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!
Additional Products you may need to install this kit:
|Click HERE for 90 degree steering stabilizer bracket ||Click HERE for flat mount steering stabilizer bracket |