Secure Checkout
Due to high order volume, there is a 5 day lead time on all new orders.We apologize for the inconvenience.
Free Shipping On Qualifying Orders Over $250!
Your Shopping Cart Is Empty

Secure Checkout

SKU: R1306 7/8" Heim Steering Kit

7/8" Heim Steering Kit
Click image to zoom
Purchase 7/8" Heim Steering Kit
  • 7/8" Heim Steering Kit

  • ★★★★★ ★★★★★ 20 reviews
  • Part Number: R1306
  • Shipping Weight: 38.00 pounds

  • $412.00 $309.00 $412.00Save On Complete Kits

  • Tie Rod Tubing Length:  
    Bolt Size:  
    Upgrade to adjustable threaded tube bung?:  

RuffStuff 7/8" Heim Steering Kit

This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms. The arms or knuckles would need a 3/4" bore. The adjustment is easier because we add Hex Head weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench, which will scar the tube and if too deep, cause a major stress riser. Not to mention what it does to the paint... These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and 7/8" Ruffstuff Heat Treated Chromoly heim joints.

Kit Includes:

One of the unique things about this setup is the Safety Misalignment. We combine the misalignment you need with the Safety Washer you also need, eliminating a join point which is a potential stress riser and an obvious shear point. We do not provide the 3/4" bolts you will need. You must determine the length you need and it will vary with the thickness of your High Steer arm & Pitman Arm.

Note

  • Toyota's with close mounting/6 shooter knuckles, 3/4 heim steering is recommended for the smaller heim joint heads
  • This is a do it yourself style kit that requires welding by a competent person with the right equipment, don't skimp, do it right!
  • You will need to check clearances with the steering at lock to see if you need to add any bends before you cut it down to clear diff covers, sway bar mounts, etc
  • We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!

Additional Products you may need to install this kit:

Write Review
★★★★★ ★★★★★
4.9/5 Stars out of 20 Reviews
1
0
2
0
3
0
4
2
5
18
Pages 1   2   3   4
Mr
5
kevin beutler (Sanger ca) | June 18th, 2022
Everything was good except one of the 7/8 right hand Heim joint and insert seized together while attempting to thread them together i’ve tried to call to see about getting a new one but could not get it taken care of.
7/8 heim steering kit
5
Trent (Indiana) | April 7th, 2022
This product is no different than everything else ruffstuff carries all beef and no B.S. will definitely order here before anywhere else for my project
Best steering setup
5
Shane (Upstate NY) | July 24th, 2021
Ruffstuff makes some of the toughest stuff out there this was no exception. Super high strength, quality and ease of installation. Thank you guys! Best money I’ve spent on my xj has been here!
Best all around
5
Mike (Pa) | November 16th, 2020
RuffStuff is known for their hardcore builder parts and this kit is nothing less then pure beef at a reasonable cost.
Verified Buyer
Great product , great price
4
Jared (Albany, OR, US) | June 5th, 2020
Awesome product very happy with all products I’ve ordered over time. Only got 4 starts simply because I’ve never received stickers in anything I’ve ordered. I created an account just for this review.
  • 7/8" Heim Steering Kit

  • BleepinJeep | RuffStuff Specialties DIY High Steer Kit

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Rate Product