This DECKED truck bed organizer fits a Ford F-150 pickup manufactured from 1997 to 2003 with a bed length of 6'6". It also fits the 2004 Heritage Edition with bed length of 6'6". It takes a standard bed DECKED system.
Since 2004 was a transition year, Ford produced old and new body styles for the 2004 model F-150 with a 6'6" bed length. If you have stepped down passenger and driver side door windows, you have the newer F-150 and will need the DECKED System DF3.
Because the standard DECKED system is 75.25", there will be about 2.75" of empty space between the tailgate end of the DECKED system and the tailgate (blue area on image below). DECKED drawers require 4" to be opened, but the first 5 1/2" of the drawer are taken up by the handle cavity and drawer taper. Thus, it is nearly impossible to remove anything from the drawers with the tailgate closed.
Built from 100% recycled HDPE (High Density Polyethylene) co-molded to a galvanized recycled steel subframe System payload rating: 2000 lbs evenly distributed on the deck Drawer payload rating: 200 lbs per drawer System weight: 200 lbs short bed systems, 220-230 lbs standard bed systems Two full bed-length drawers.
Note: Drawers do not fully extend. Max drawer extension: 48 for reasons related to physics Drawers are weatherproof. System itself is impervious to moisture, extreme UV light exposure and severe temperatures Oversized cast aluminum handles for ease of operation with gloves No drilling or alteration of vehicle required Full line of accessories available to increase your level of awesome Will work with a spray-in bed liner, but not a drop-in plastic bed liner Will work with a BedRug mat, but not with a BedRug full liner. Does not fit the F-150 short bed (5' 6"") SuperCrew Heritage made from 2001 through 2003 (2004 badged as the SuperCrew Heritage) with the Stepside / Flareside tailgate. If your Ford pickup has a tailgate assist handle mounted on the tailgate, this MAY interfere with the DECKED unit, depending on your model year. You can easily remove the handle and the tailgate step will not impact the installation or use of your DECKED unit. The DECKED system is NOT compatible with any in-bed towing packages including 5th Wheel and Gooseneck packages
HIGH DENSITY POLYETHYLENE (HDPE)
STAINLESS STEEL HARDWARE
CAST ALUMINUM HANDLES
GALVANIZED STEEL SUBFRAME
EVENLY DISTRIBUTED PAYLOAD2000 LB
DRAWER CAPACITY (EACH)200 LB
SHORT BEDSTANDARD BED
WIDTH (Truck/Cargo Van, varies per SKU)63"-71" 63"-71"
WIDTH (Service Body Only)NA47"
TOTAL WEIGHT (LBS)~220~230
DIMENSIONS67"x 39" x 23"78"x 39" x 23"
WEIGHT (LBS) (Truck/Van)241 (T) - 241-250 (V)270 (T) - 267-277 (V)
LENGTH (TOP OF DRAWER)61.4"72.1"
LENGTH (BOTTOM OF DRAWER)55.4"66.1"
WIDTH (TOP OF DRAWER)18"18"
WIDTH (BOTTOM OF DRAWER)16.75"16.75"
DRAWER VOLUME (EACH)5.4 FT36 FT3
DRAWER EXTENSION (EACH)42"42"
GALVANIZED STEEL TUBES12 TUBES14 TUBES
LENGTH IN DETAIL:
Overall Length-Short 64.54" [1639.2 mm]; Long 75.25" [1911.35 mm]
Length-Difference in Standard and Short System: 10.714" [272.14mm]
Length-Tailgate Ammo Can Center to System Center: 26.5" [673.1 mm]
Length-Cabside Ammo Can Center to Tailgate Ammo Can Center: Short 49.286" Standard 60"
WIDTH IN DETAIL:
Overall Width-71" [1803.4 mm]
Width-Lateral Steel Tubes minus End Caps: 61.54" [1563.11 mm]
Width-Underside - Widest Lateral Steel Tube Plastic Supports: 63.15" [1603.91 mm]
Width-Base of Ammo Cans at Widest Point: 58.00" [1473.2 mm]
Width-C channel Mtg to C channel Lateral Mounting Distance: 46.04" [1169.25 mm]
Width-Minimum Overall that Clears Ammo Can Openings: 63.04" [1601.2 mm]
Width-Drawer Centerline to Center of Vert: 11.5" [292.1 mm]
HEIGHT IN DETAIL:
Overall Height: 12"; plus .19" to Top of D Tread on Deck for a total of 12.19" [309.6 mm]
Height-Base to Underside of Lowest Top Surface of Deck (aka. to clear wheelhouse): 11.75" [298.45 mm]
Height-Base to Underside of Lateral Steel Tube Plastic Supports: 10.5" [266.7 mm]
Height-Base to Underside of Lateral Steel Tube: 10.75" [273.05 mm]
Height-Base to Ammo Can Top Mounting Surface: 10.5" [266.7 mm]