This DECKED truck bed organizer fits a Nissan Titan pickup truck with a bed length of 5'7" manufactured from 2004 to 2015. It takes a short bed DECKED system.
KEY FEATURES
Built from 100% recycled HDPE (High Density Polyethylene) co-molded to a galvanized recycled steel subframe System payload rating: 2000 lbs evenly distributed on the deck Drawer payload rating: 200 lbs per drawer System weight: 200 lbs short bed systems, 220-230 lbs standard bed systems Two full bed-length drawers.
Note: Drawers do not fully extend. Max drawer extension: 48" for reasons related to physics Drawers are weatherproof. System itself is impervious to moisture, extreme UV light exposure and severe temperatures Oversized cast aluminum handles for ease of operation with gloves No drilling or alteration of vehicle required Full line of accessories available to increase your level of awesome Does not fit 8' long truck beds Will work with a spray-in bed liner, but not a drop-in plastic bed liner Will work with a BedRug mat, but not with a BedRug full liner. The DECKED system is NOT compatible with any in-bed towing packages including 5th Wheel and Gooseneck packages.
Free Shipping
CONSTRUCTION:
HIGH DENSITY POLYETHYLENE (HDPE)
STAINLESS STEEL HARDWARE
CAST ALUMINUM HANDLES
GALVANIZED STEEL SUBFRAME
WEIGHT CAPACITIES
EVENLY DISTRIBUTED PAYLOAD2000 LB
DRAWER CAPACITY (EACH)200 LB
SYSTEM DIMENSIONS
SHORT BEDSTANDARD BED
LENGTH64.54"75.25"
WIDTH (Truck/Cargo Van, varies per SKU)63"-71" 63"-71"
WIDTH (Service Body Only)NA47"
HEIGHT12"12"
TOTAL WEIGHT (LBS)~220~230
SHIPPING DIMENSIONS
DIMENSIONS67"x 39" x 23"78"x 39" x 23"
WEIGHT (LBS) (Truck/Van)241 (T) - 241-250 (V)270 (T) - 267-277 (V)
DRAWER DIMENSIONS
LENGTH (TOP OF DRAWER)61.4"72.1"
LENGTH (BOTTOM OF DRAWER)55.4"66.1"
WIDTH (TOP OF DRAWER)18"18"
WIDTH (BOTTOM OF DRAWER)16.75"16.75"
HEIGHT8.5"8.5"
DRAWER VOLUME (EACH)5.4 FT36 FT3
DRAWER EXTENSION (EACH)42"42"
STEEL SUBFRAME
GALVANIZED STEEL TUBES12 TUBES14 TUBES
LENGTH IN DETAIL:
Overall Length-Short 64.54" [1639.2 mm]; Long 75.25" [1911.35 mm]
Length-Difference in Standard and Short System: 10.714" [272.14mm]
Length-Tailgate Ammo Can Center to System Center: 26.5" [673.1 mm]
Length-Cabside Ammo Can Center to Tailgate Ammo Can Center: Short 49.286" Standard 60"
WIDTH IN DETAIL:
Overall Width-71" [1803.4 mm]
Width-Lateral Steel Tubes minus End Caps: 61.54" [1563.11 mm]
Width-Underside - Widest Lateral Steel Tube Plastic Supports: 63.15" [1603.91 mm]
Width-Base of Ammo Cans at Widest Point: 58.00" [1473.2 mm]
Width-C channel Mtg to C channel Lateral Mounting Distance: 46.04" [1169.25 mm]
Width-Minimum Overall that Clears Ammo Can Openings: 63.04" [1601.2 mm]
Width-Drawer Centerline to Center of Vert: 11.5" [292.1 mm]
HEIGHT IN DETAIL:
Overall Height: 12"; plus .19" to Top of D Tread on Deck for a total of 12.19" [309.6 mm]
Height-Base to Underside of Lowest Top Surface of Deck (aka. to clear wheelhouse): 11.75" [298.45 mm]
Height-Base to Underside of Lateral Steel Tube Plastic Supports: 10.5" [266.7 mm]
Height-Base to Underside of Lateral Steel Tube: 10.75" [273.05 mm]
Height-Base to Ammo Can Top Mounting Surface: 10.5" [266.7 mm]
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.