This DECKED truck bed organizer fits a Ford Super Duty pickup truck with a bed length of 6'9" manufactured from 2009 to 2016. It takes a standard bed DECKED system.
NOTE: the Ford Super Duty is the longest bed we currently fit. Because the standard DECKED system is 75.25", there will be about 5.75" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED drawers require 4" to be opened, but the first 5 1/2" of the drawer are taken up by the handle cavity and drawer taper. Thus, it is nearly impossible to remove anything from the drawers with the tailgate closed.
Built from 100% recycled HDPE (High Density Polyethylene) co-molded to a galvanized recycled steel subframe System payload rating: 2000 lbs evenly distributed on the deck Drawer payload rating: 200 lbs per drawer System weight: 200 lbs short bed systems, 220-230 lbs standard bed systems Two full bed-length drawers.
Note: Drawers do not fully extend. Max drawer extension: 48 for reasons related to physics Drawers are weatherproof. System itself is impervious to moisture, extreme UV light exposure and severe temperatures Oversized cast aluminum handles for ease of operation with gloves No drilling or alteration of vehicle required Full line of accessories available to increase your level of awesome Does not fit 8' long truck beds Will work with a spray-in bed liner, but not a drop-in plastic bed liner Will work with a BedRug mat, but not with a BedRug full liner. You will need to remove your current tie-downs, using a 10mm socket or wrench, and install the new tie-downs that are include with the DECKED unit If your Ford pickup has a tailgate assist handle mounted on the tailgate, this MAY interfere with the DECKED unit, depending on your model year. You can easily remove the handle and the tailgate step will not impact the installation or use of your DECKED unit. If your Ford pickup is the Platinum edition, you will need to remove the handle. The DECKED system is NOT compatible with any in-bed towing packages including 5th Wheel and Gooseneck packages
HIGH DENSITY POLYETHYLENE (HDPE)
STAINLESS STEEL HARDWARE
CAST ALUMINUM HANDLES
GALVANIZED STEEL SUBFRAME
EVENLY DISTRIBUTED PAYLOAD2000 LB
DRAWER CAPACITY (EACH)200 LB
SHORT BEDSTANDARD BED
WIDTH (Truck/Cargo Van, varies per SKU)63"-71" 63"-71"
WIDTH (Service Body Only)NA47"
TOTAL WEIGHT (LBS)~220~230
DIMENSIONS67"x 39" x 23"78"x 39" x 23"
WEIGHT (LBS) (Truck/Van)241 (T) - 241-250 (V)270 (T) - 267-277 (V)
LENGTH (TOP OF DRAWER)61.4"72.1"
LENGTH (BOTTOM OF DRAWER)55.4"66.1"
WIDTH (TOP OF DRAWER)18"18"
WIDTH (BOTTOM OF DRAWER)16.75"16.75"
DRAWER VOLUME (EACH)5.4 FT36 FT3
DRAWER EXTENSION (EACH)42"42"
GALVANIZED STEEL TUBES12 TUBES14 TUBES
LENGTH IN DETAIL:
Overall Length-Short 64.54" [1639.2 mm]; Long 75.25" [1911.35 mm]
Length-Difference in Standard and Short System: 10.714" [272.14mm]
Length-Tailgate Ammo Can Center to System Center: 26.5" [673.1 mm]
Length-Cabside Ammo Can Center to Tailgate Ammo Can Center: Short 49.286" Standard 60"
WIDTH IN DETAIL:
Overall Width-71" [1803.4 mm]
Width-Lateral Steel Tubes minus End Caps: 61.54" [1563.11 mm]
Width-Underside - Widest Lateral Steel Tube Plastic Supports: 63.15" [1603.91 mm]
Width-Base of Ammo Cans at Widest Point: 58.00" [1473.2 mm]
Width-C channel Mtg to C channel Lateral Mounting Distance: 46.04" [1169.25 mm]
Width-Minimum Overall that Clears Ammo Can Openings: 63.04" [1601.2 mm]
Width-Drawer Centerline to Center of Vert: 11.5" [292.1 mm]
HEIGHT IN DETAIL:
Overall Height: 12"; plus .19" to Top of D Tread on Deck for a total of 12.19" [309.6 mm]
Height-Base to Underside of Lowest Top Surface of Deck (aka. to clear wheelhouse): 11.75" [298.45 mm]
Height-Base to Underside of Lateral Steel Tube Plastic Supports: 10.5" [266.7 mm]
Height-Base to Underside of Lateral Steel Tube: 10.75" [273.05 mm]
Height-Base to Ammo Can Top Mounting Surface: 10.5" [266.7 mm]