This DECKED truck bed organizer fits a Nissan Frontier pickup truck with a bed length of 6'1" manufactured from 2005 to current. It takes a long midsize bed DECKED system.
NOTE: This vehicle requires drilling 8 holes in the truck bed for installation.
NOTE: Because the long midsize DECKED system is 68", there will be about 4.86" of empty space between the tailgate end of the DECKED system and the tailgate. DECKED drawers require 4" to be opened, but the first 5 1/2" of the drawer are taken up by the handle cavity and drawer taper. Thus, it is nearly impossible to remove anything from the drawers with the tailgate closed.
KEY FEATURES
- Built from 100% recycled HDPE (High Density Polyethylene) co-molded to a galvanized recycled steel subframe
- System payload rating: 2000 lbs evenly distributed on the deck
- Drawer payload rating: 200 lbs per drawer
- Two full bed-length drawers. Note: Drawers do not fully extend.
- Drawers are weatherproof. System itself is impervious to moisture, extreme UV light exposure and severe temperatures
- Oversized cast aluminum handles for ease of operation with gloves
- Will work with a spray-in bed liner, but not a drop-in plastic bed liner
- Will work with a BedRug mat, but not with a BedRug full liner.
- The midsize system features one full-size drawer and one narrow drawer. The full-size drawer fits regular dividers, the D-Box and the Crossbox. The Narrow drawer fits narrow dividers and the Crossbox. The midsize system is also compatible with locks, drain plugs and CoreTrax.
CONSTRUCTION:
HIGH DENSITY POLYETHYLENE (HDPE)
STAINLESS STEEL HARDWARE
CAST ALUMINUM HANDLES
GALVANIZED STEEL SUBFRAME
WEIGHT CAPACITIES
EVENLY DISTRIBUTED PAYLOAD2000 LB
DRAWER CAPACITY (EACH)200 LB
SYSTEM DIMENSIONS
SHORTLONG
LENGTH4'8"5'8"
WIDTH (VARIES TO FIT VEHICLE)56" - 64" 56" - 64"
HEIGHT12"12"
TOTAL WEIGHT (LBS)205229
NARROW DRAWER DIMENSIONS
LENGTH (TOP OF DRAWER)53" 64.7"
LENGTH (BOTTOM OF DRAWER)47.3" 59"
WIDTH (TOP OF DRAWER)11" 11"
WIDTH (BOTTOM OF DRAWER)9.75" 9.75"
HEIGHT8.5"8.5"
DRAWER EXTENSION36" 43"
WIDE DRAWER DIMENSIONS
LENGTH (TOP OF DRAWER)53" 64.7"
LENGTH (BOTTOM OF DRAWER)47.3" 59"
WIDTH (TOP OF DRAWER)18" 18"
WIDTH (BOTTOM OF DRAWER)16.75" 16.75"
HEIGHT8.5"8.5"
DRAWER EXTENSION36" 43"
STEEL SUBFRAME
GALVANIZED STEEL TUBES67
LENGTH IN DETAIL:
Overall Length: Short 56.28 in [1429.51mm] Long 68.01 in [1727.45mm]
Length - Difference in Long and Short System: 11.73 in (equivalent to Lateral Steel Tube spacing)
Length - Stud Long. Center to TGAC Long Center: Short 37.82in [960.62mm ] Long 49.55in [1258.53mm ]
Length - TGAC Long. Center to Deck Pnl Long. Center: Short 17.04 in [432.68 mm] Long 22.9in [581.661mm ]
WIDTH IN DETAIL:
Overall Width: 64.00 in [1625.6 mm]
Width - Lateral Steel Tubes minus End Caps: 54.54 in [1385.32]
Width - Underside - Widest Lateral Steel Tube Supports: 56.19 in [1427.22 mm]
Width - Base of Ammo Cans @ Widest Point: 51.19 in [1300.21 mm]
Width - C channel Mtg to C channel Lateral Mounting Distance: 39.03 in [991.46 mm]
Width - Minimum Overall that Clears Ammo Can Openings: 55.98 in [1421.90 mm]
Width - Wide Drawer Centerline to Center of Vert: 11.5 in [292.1 mm]
Width - Wide Drawer - Wheel Centerline to Wheel Centerline: 14.71 in [373.63 mm]
Width - Narrow Drawer - Wheel Centerline to Wheel Centerline: 14.71 in [373.63 mm]
Width - Wide Drawer - Centerline of Wheel Track to Centerline of Wheel Track: 15.00 in [381.00 mm]
Width - Narrow Drawer - Centerline of Wheel Track to Centerline of Wheel Track: 7.75 in [196.91 mm]
HEIGHT IN DETAIL:
Deck Height - Top of D Tread: 12.19 in [309.6 mm]
Deck Height - Underside of Lowest Top Surface (i.e. to clear wheelhouse): 11.75 in [298.45]
Deck Height - Underside Lateral Steel Tube Supports: 10.5 in [266.7 mm]
Deck Height - Underside Lateral Steel Tube: 10.75 in [273.05 mm]
Ammo Can Top Mounting Surface to Bottom: 10.5 in [266.7 mm]
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.