Secure Checkout
We currently have a 7 day lead time on all orders. We apologize for any inconvenience and appreciate your patience!
Your Shopping Cart Is Empty

Secure Checkout

SKU: R1017-A 14 Bolt Disc Brake Bracket Pair for Single Rear Wheels (SRW)

14 Bolt Disc Brake Bracket Pair for Single Rear Wheels (SRW)
Click image to zoom
Purchase 14 Bolt Disc Brake Bracket Pair for Single Rear Wheels (SRW)
  • 14 Bolt Disc Brake Bracket Pair for Single Rear Wheels (SRW)

  • ★★★★★ ★★★★★ 30 reviews
  • Part Number: R1017-A
  • Shipping Weight: 6.90 pounds

  • $59.00

  • In Stock

14 Bolt Disc Brake Bracket Pair for Single Rear Wheels (SRW)

NOTE: Fits 73-87 single rear wheel full float 14 bolt housings. Requires steel wheel 15" with a maximum 4" back spacing

Buy the complete kit HERE

14 Bolt disc brake bracket kit


Our full float 14 Bolt Disc Brake Brackets are bent, eliminating spacers therefore making them stronger and slightly lighter as well.

All of our brackets are 3/8" thick for strength and rigidity and it costs us less to make which we can pass on to you the customer.

These will only work on 73-87 axle, the newer axles are hit and miss. To double check, measure from the 4 bolt mounting flange to the surface the wheel studs press up against (back of hub) should be about 4 11/16". Chevy Calipers & Rotors not included. These make the 14 bolt Disc Brake Conversion easy!

These, like all of our Disc Brake Brackets are sold in pairs.

*NOTE* If longer studs are needed, usually dually studs are long enough. Double check stud diameter, studs should drop freely into the rotor. DO NOT press studs into the rotor. If your hub has too large of studs you will need to drill the rotors to accept them. Be sure to have minimum 5/8" lug nut thread engagement once the wheel is installed

*NOTE* This is for Full Float axles only, does not work on Semi Float NAPA Part numbers for 73-87 3/4 Ton Front, 4x4, Chevy Calipers and Rotors:

Use these brackets with our calipers found here GM Dual Bleeder Loaded Brake Caliper (ruffstuffspecialties.com) or Cadillac El Dorado Caliper Set with Parking Brake Lever (ruffstuffspecialties.com)

Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers Rotor Only - 4885677 - all years Brake line-H86572

Write Review
★★★★★ ★★★★★
5/5 Stars out of 30 Reviews
1
0
2
0
3
0
4
0
5
30
Pages 1   2   3   4   5
NASA engineer
5
Marco (Massachusetts) | September 15th, 2022
Great brackets but bolts don’t go through the holes had to ream them all out .
Caliper brackets
5
Gilbert Freeman II (FL) | July 16th, 2022
Great product would buy again... installation was easy
Great fit, easy install, quality product for cheap
5
John W (Delaware) | November 9th, 2020
Bought this bracket for my 1986 k30. The bracket was priced lower than the competitors. Shipping was quick and install went perfectly.
Verified Buyer
fit my 2000 2500 with mod.
5
Gene Howell (Hoonah, AK, US) | March 23rd, 2020
First, these are fantastic adapters. My third set. They do fit the newer (to 2000 classic) 14 bolts. GM moved the spring outward which creates a clearance issue with the caliper. You need to rotate them a little so they clear the leaf spring and drill new holes. I placed mine just below the spring to the rear. Best and easiest place to run the brake lines and for protection from obstacles.
Verified Buyer
OUTSTANDING PRODUCTS AND SERVICE
5
Joshua Hollenbeck (Payson, AZ, US) | September 11th, 2017
I found out about this company through a friend of mine and have never turned back. The brackets are stout and I know they will take abuse. And customer service is second to none!!!
⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Rate Product