Toyota Crossover Steering Kit

Toyota Crossover Steering Kit

Thinking about beefing up your stock Toyota steering? We've got the product for you! Heavy duty FJ-80 Landcruiser tie rod ends combined with 1.5" X .25" Wall DOM tubing for your Draglink & Tie Rod is the answer for any Toyota crossover high steer applications. The Tie Rod Ends have the same taper as FJ40, FJ80, and mini truck however you cannot plug and play these into your stock steering linkage so this DIY kit comes with tubing and weld in bungs to make your custom steering. These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are much more beefy than stock.

These do require the use of high steer arms and are not for a Y link steering application.

You will receive:

• 1 - 54" of 1.5" X .25" wall D.O.M. tubing
• 1 - 43" of 1.5" X .25" wall D.O.M. tubing
• 4 - Heavy Duty 23mm x 1.5 Hex Head Tube Adapters (2) Right hand & (2) Left hand Thread
• 4 - 23mm x 1.5 Jam Nuts, 2 LH & 2 RH, for Tie Rod Ends
• 4 - FJ-80 Landcruiser tie rod ends, 23mm x 1.5, (2) Left Hand & (2) Right Hand Thread

We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!

Additional Products you may need when installing this kit:

Flat Mount Steering Stabilizer Bracket

90 Degree Steering Stabilizer Bracket

Toyota Pitman Arm (2 9/16" Drop)