Secure Checkout
Please click here to learn about our covid 19 procedures
give us a call at (916) 600-1945, we are ready to help!
Your Shopping Cart Is Empty

Secure Checkout

SKU: R2305 Radius Rod Complete Kit RZR XP 1000 (Campbell Series)

Radius Rod Complete Kit RZR XP 1000 (Campbell Series)
Click image to zoom
Purchase Radius Rod Complete Kit RZR XP 1000 (Campbell Series)
  • Radius Rod Complete Kit RZR XP 1000 (Campbell Series)

  • ★★★★★ ★★★★★ 1 review
  • Part Number: R2305
  • Shipping Weight: 30.00 pounds

  • Quantity in Basket:  None

  • $535.50

  • Please Select:  

This is a discontinued item with limited quantity. Powder coated options are sold out and only bare steel options are available. Please call to order and check availability

Note: There are special editions and models that can be an exception to which bolt size you may have. Be sure to check what size radius rod bolts you have. 15mm Socket = 10mm Bolts and 18mm Socket = 12mm.

Our Lower Radius Rods are also very simple but with some serious improvements over the factory rods. The factory Radius Rods are simply too thin to add the bends needed for clearance which is a fail on both accounts. Being so thin () they are both delicate AND dont have the clearance to avoid obstacles.

The stock Radius Rods are 3/4 Diameter X .065 Wall Mild Steel. We make our Lower Radius Rods with 1.25 Diameter .25 Wall CNC Bent 4130 Chromoly material strong enough to take the bends required to give the additional clearance. Remember that our kits give you 3 more clearance than stock and can take the hit that will eventually come. The chassis end employs a 7/8 Heat Treated Stainless Uniballs housed in a 4130 Chromoly cup to prevent roll. The wheel side uses a 5/8 Heat Treated 4130 Chromoly Rod End.

The Lower Radius Rods are more than 500% stronger than the 3/4 stock rods and they weigh in at 7lbs each so the 3.5lb weight gain versus the strength gain matters very little.

Our Upper Radius Rods are really very simple but definitely stand out from the crowd. When you look at the stock rods you think they are fine, they are out of the way but you dont think about what will happen to them if the lowers fail. We cure that issue by making them strong enough to withstand a lower radius rod failure while retaining the flexibility required.

These are built from solid 1.25 round 7075 aluminum bar, a material known for extreme flexibility and strength with ⅝ heat treated chromoly heim joints versus tin foil thick stock rods with bushing ends. Which would you prefer? The weight difference is lb.

Kit Includes

  • 7075 upper radius rods with rod ends and misalignment spacers
  • Lower (high clearance) 4130 radius rods with rod ends, uni balls and spacers


  • 2016+ Polaris RZR XP 1000 Turbo
  • 2016+ Polaris RZR XP 1000

Write Review
★★★★★ ★★★★★
5.00/5 Stars out of 1 Reviews
Verified Buyer
Greatstuff from RuffStuff
cody almstrom (vacaville, CA, US) | January 12th, 2018
Love the build quality and ease of installation. Be sure to let the guys at ruffstuff know the bolt size your using 10mm or 12mm before ordering.


Questions & Answers

Ask a question

Rate Product