SKU: R1326 Tie Rod End Offset, ES23434 TRE
These Tie Rod Ends (TRE's) are offset by 1 inch, so in a cross over steering setup you can move to an oversize tie rod without hitting the cover at full lock. They are the standard GM 1 ton taper with a 7/8"-18 TPI threaded shank. These are sold as Lefts & Rights and we also sell them as a complete kit with 1 1/2" X .25" wall DOM tubing. Offset ends should only be used on straight linkage, not recommended for tubing with bends
RuffStuff Offset All Metal TRE