Due to an increase in order volume, there is currently a 4-5 day turn around time for new orders. Thank you for your patience.
SKU: R1252 Universal Shackle Flip Kit
The bushing sleeve is 2" x .25 wall DOM and is attached on four sides to the 1/4" plate torsion box mounting bracket. This enclosed design eliminates the need for any additional gusseting other kits require. The Bushings themselves are 1 1/2" in the minor diameter so you can flex them hard without tearing up the bushings and the bushing shoulder is 1/4" thick for the same reason. If you intend to bolt them on, we would recommend removing the gas tank to install them. They mount through 4 holes you need to drill and after removing the gas tank (if necessary) should take no more than 45 minutes to install. To help you determine your ride height and shackle length, the center of the shackle eyelet sits about 1 1/8" below the mounting plate. You should always use a shackle length that is ideal for your chosen springs.
Everything in the picture is included, on the shackles we offer either a 4", 5", 6", or 7" long.
We need a couple of questions answered before we can make these for you.PLEASE USE PICTURE TO FIND NEEDED DIMENSIONS
All custom widths will be within .010" of requested size