Home Contact Us About Us Jeep Parts & Accessories Where we shop Blog Search Login View Cart (0)

4 Link Kit Lowers Triangulated (Option 2)

4 Link Kit Lowers Triangulated (Option 2)

NOTE: All link brackets have 9/16" holes. If the option to choose a larger bolt size is selected, the bracket holes will need to be drilled to match. Both of the adjustable link brackets only come with 5/8" holes, and do not have options for other sizes. adjustable upper frame bracket

These are very complete and simple! 4 linking a rig shouldn't be a mystery. It's really not that difficult or expensive. This kit will allow you to create a single triangulated 4 Link suspension with the lowers triangulated. Why the lowers and not the uppers? Sometimes you want the uppers straight to help maintain a lower vehicle. You can finish it with coilovers, standard emulsion shocks, or coil springs... You will probably be redoing some of your brake lines if you get this kit so don't forget to check out our BRAKE LINE PARTS


  • 4 - RH 1.25" Heims, jams and tube adapters
  • 4 - LH 1.25" Heims, jams and tube adapters
  • 16 - Stainless Steel misalignment spacers
  • 2 - Upper frame link brackets (Adjustable Link brackets have 5/8" holes)
  • 1 - Lower dual triangulated link bracket
  • 2 - 3" small link tabs
  • 2 - 3" large link tabs
  • 2 - Link Towers
Customer Reviews
Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 2 Reviews
Write a review

5 out of 55 out of 55 out of 55 out of 55 out of 5 Hardcore, but not welded yet
By Remy Blaettler in CA on 3.26.2018
So, I'm a complete beginner at this and I needed this suspension for an RV Trailer. For that, it's complete overkill. I think you could build a Monster Truck with it. That aside, the parts fit well and are of high quality. The kit is complete and delivery was fast. But you have to weld the individual parts together yourself. But I assume, if you embark on a project like this, that's peanuts for you anyway.

5 out of 55 out of 55 out of 55 out of 55 out of 5 great parts great people
By Brian mcgill in mo on 3.3.2014
I finally found honest people to deal with. the 4-link kits are good stuff. don't think ill be tearing this up very soon everything fits together good like a puzzle ,my 12 yr old could put this together. good stuff ill be back for sure.

Questions and Answers

Ask a Question


Mr. B. on -- Asked: Hi, Have you had any customers install this kit on a JKU? I'm interested in this, or just going with your "DIY Jeep Long Arm Kit, Pair" on both front and rear axles. What is your recommendation? '15 Jeep JKU ProRock 44 front, stock 44 rear Atlas tcase stock motor and trans Thanks!

Answered: Hello, I have not seen anyone install the lower triangulated kit on the JKU so not sure what kind of fitment issues you may run into. The DIY Long Arm Kit would likely be an easier install but most radius arm setups will see restricted axle articulation. If you are looking for maximum travel and are experienced in installing link suspension I would go with the 4 link kit, if this is your first link install then the long arm kit will be easier to work with

5 out of 55 out of 55 out of 55 out of 55 out of 5 2 Reviews Read
Part Number: 
Shipping Weight: 
55.00 pounds

Tube Length:


Add Bolts:

Link Tower Option:

Upper Frame Link Bracket:

Related Item(s)

Customers who purchased this product, also purchased:
3 Link Kit with 1.25" Heims
3.0" Axle Mount Shock Tabs, Pair
Ruffstuff Tshirt, Black
12" Shock Tower, 2" Deep - Pair
3/4" Rod End Set 1" Tube ID