7/8" x 18TPI LH Tube Adapter 1" ID HEX
They are more expensive to make than our standard weld bungs but make setting up your steering that much easier.
*Tips to help prevent any seized or warped threads.
Correctly adjust welder settings. (Too much heat can warp the threads)
Not welding the tube adapter with the rod end threaded inside. (Getting the rod end too hot can damage the liner)
Be careful to not keep too much heat on the tube adapter when welding inside of D.O.M.
Write a review
Customers who purchased this product, also purchased:
|7/8" x 18TPI RH Tube Adapter 1" ID HEX|
|7/8" TRE Jam Nut (18TPI) LH|
|7/8" TRE Jam Nut (18TPI) RH|
|DOM Tube, 1.5" X .25" Wall, 1" Tube ID|
|Tie Rod Offset, ES23434 TRE|