Toyota Crossover Steering Kit
Thinking about beefing up your stock Toyota steering? We've got the product for you! Heavy duty FJ-80 Landcruiser tie rod ends combined with 1.5" X .25" Wall DOM tubing for your Draglink & Tie Rod is the answer for any Toyota crossover steering applications. The Tie Rod Ends have the same taper as FJ40, FJ80, and the famous Mini truck however you cannot plug and play these into your stock Mini or FJ40. First you will have to increase your Tie Rod diameter, the complete reason for this kit!
The adjustment is easier because we add Hex Head TRE weld bungs so a cresent wrench is your adjustment tool, not a pipe wrench which will scar the tube and if too deep cause a major stress riser. Not to mention what it does to the paint...
These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are much more beefy than stock
You will receive:
- 2 - 54" of 1.5" X .25" wall DOM tubing
- 4 - Heavy Duty 23mm x 1.5 Hex Head Tube Adapters (2) Right hand & (2) Left hand Thread
- 4 - 23mm x 1.5 Jam Nuts, 2 LH & 2 RH, for Tie Rod Ends
- 4 - FJ-80 Landcruiser tie rod ends, 23mm x 1.5, (2) Left Hand & (2) Right Hand Thread
We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!
Click HERE for 90 degree steering stabilizer bracket
Click HERE for flat mount steering stabilizer bracket
Click HERE for a Toyota 2 9/16" drop pitman arm
Write a review
Customers who purchased this product, also purchased:
|Ruffstuff Tshirt, Black|
|Toyota Axle Housing Bash Plate 3/8" Thick, Diff Guard|
|Bushed DOM Sleeve|
|FJ80 Knuckle Kit Hellfire Fabworks|
|Steering Stabilizer Plate 90 Degree|