This is our basic differential cover, we see it as the only one worth making. It is designed specific to the Super Duty front axle as the cover is more shallow to clear steering linkage and will not clear the ring gear of a standard D60. The Ford Superduty front Dana 60 axles are found stock on 1999 to present F250 and F350 trucks.
The differential cover is a 1 piece 3/8" (.375") plate steel cap bent 8 ways then welded to a 3/8" ring! The fill plug is a generous 1" ID for easy fill and oil level check. After welding, the mounting surface is machined absolutely flat for a perfect fit!
Our Covers also fit the Super Duty Dana 50 axle found in 1998-2002 F250 & F350. These will only work on the Super Duty front axles
- Ring and the Cover are 3/8" thick
- Plate steel cover bent 8 ways
- Machined absolutely flat for a perfect fit
- All seams fully welded inside and out
Questions and Answers
Gus M. on -- Asked:
Hi, will this cover fit a 2003 Ford Excursion with Dana 50 axle?
Thanks for your time!
Yes, the Super Duty Dana 50 uses the same cover
Todd B. on -- Asked:
What is the overall depth of the cover?
Measuring from the mounting surface these sit about 2 7/8" tall
Tom on -- Asked:
How much shallower is the super duty cover over your standerd cover. Answered:
The Super Duty cover is about 5/8" shorter than the standard Dana 60 cover.