Front Bumper RZR XP 1000 (Campbell Series)
Made to be simple and strong with clean lines and features you will not find elsewhere.
This bumper, unlike the others on the market was designed by a successful racer and prominent fabricator with more than 25 years of off road experience of all types. The majority of our UTV products are designed by Shannon Campbell. Shannon is well known as an innovator when necessary and knows when to leave well enough alone.
First and foremost let's talk about tube thickness and diameter. Where others use .065 or .095 wall thickness in a 1 or 1.25 diameter, we use 1.5 OD x .120 wall. Youve got remember these are bumpers and you are going to impact things if you use this to its full potential!
Next, let's look at what Shannon did differently. Notice the winch placement. The factory mount only allows for a small capacity winch, which may not get you out of the mud. These bumpers move the winch position, so you can use up to a 9000lb winch. This is much stronger and higher capacity than the factory option, which makes for safer and faster winching.
This makes it very accessible with a nice approach angle. They also utilize a ½ UHMW skid plate supported by an aluminum inner plate. Easy to install with four bolts and 10 minutes of your time.
All together this creates the best bumper configuration available. These are kept in stock powder coated satin black, but you can call and request one raw.
These bumpers have a 3"X6.59" winch plate bolt pattern, which is common on most 4,000lb and up winches (Warn Vantage, Warn Pro Vantage, TuffStuff Xtreme, Super ATV etc)
Write a review
Customers who purchased this product, also purchased:
|RZR XP 1000 Roll Cage Kit|