7/8" x 18TPI Right Hand Tube Adapter 1" ID HEX

I got a pair of them, 1 LH and 1 RH for a 1 ton over the knuckle set-up for my YJ D44 front. They fit in the tube great with plenty of material left for welding and strength. They have over an inch outside the tube so they are easy to grab onto with a wrench for tightening or loosening. These are my new go to for 1 ton steering.

I used this with welded tubing, not the DOM sold by RuffStuff because it is what I had. I do not recommend this as the fit is not great and this makes it harder to align when welding. I had to start with tubing which was looser, tack the adapter in place and then hammer it straight before welding it up. Do yourself a favor and buy the DOM. The seam inside welded tubing makes working with the welded stuff a real pain. The adapter welded easily and I had no problem getting good weld penetration.

This tube adapter along with the DOM tubing Ruff Stuff sells was exactly what I needed. The adapter fit perfectly inside the tube, no slop so I was not worried it being straight. I was a little worried about overheating the threads during welding, but everything turned out fine.

Thanks for a great product going to make my conversion so easy

Makes making steering arms easy, fast shipping, will use again when I go over to tons