We made this flip kit to this size by mistake! So we are selling it at a 20% discount to whoever can use it. All sales are final for clearance parts. Picture is not of exact product
Please use the chart in the secondary picture, we have 1 kit available, dimensions listed below:
Measurement A: 1.75"
Measurement B: 3.5"
Universal Shackle Flip Kit
The bushing sleeve is 2" x .25 wall DOM and is attached on four sides to the 1/4" plate torsion box mounting bracket. This enclosed design eliminates the need for any additional gusseting other kits require. The Bushings themselves are 1 1/2" in the minor diameter so you can flex them hard without tearing up the bushings and the bushing shoulder is 1/4" thick for the same reason. If you intend to bolt them on, we would recommend removing the gas tank to install them. They mount through 4 holes you need to drill and after removing the gas tank (if necessary) should take no more than 45 minutes to install. To help you determine your ride height and shackle length, the center of the shackle eyelet sits about 1 1/8" below the mounting plate. You should always use a shackle length that is ideal for your chosen springs.
Everything in the picture is included, on the shackles we offer either a 4", 5", 6", or 7" long.
Bushing sleeves and shackles will be made to accept 9/16" hardware
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 