Dan’s Rants And Raves!

RSSSubscribe to Updates

RuffStuff Specialties is super excited to be partnering with Rugged Radio

By: Garett On: July 8th, 2019 In: Dan's Rants And Raves!, Partners

We have done business with Greg and Lance at Rugged Radios for years, these guys are great and have always taken care of us. They supply all of our radios, handheld and hardwired for our repair vehicles that you see out at KOH, the Rubicon and what ever race we can make it to. Rugged Radios has always been a great company to work with, and their products withstand a lot of abuse. They supply intercom systems, mobile radios, hand held radios, headsets, helmet kits just to name a few. 

Rugged Radios corporate office located in Arroyo Grande, is one of the most well known sources for racing and recreational 2-way communication radios. Rugged Radio makes it easy for  you and your passengers in your UTV need to communicate with each other while wearing helmets, or your race team needs solid communications for the pit crew or chasing each other down, Rugged Radios is the solution.

Greg Cottrell, Founder of Rugged Radios has dominated the world of two-way communications for off road enthusiasts and professional race teams. With a diverse range of products, Rugged Radios outfits drivers, crew, passengers, chase teams, race officials, and more with clear communications to improve safety and, well, communication! 

It all starts with in-car intercom systems that connect the driver and passengers with headsets or, your pit crew. If you’re wearing helmets, helmet speaker kits. From there, adding a Car-2-Car kit allows you to talk from vehicle to vehicle. Depending upon the model, Car-2-Car Kits feature powerful 2-way radios to provide a communication range of 12-30 miles.

That my friends, is the heart and soul of Rugged Radios.

When RuffStuff asked about the growth of the Rugged Radios brand among consumers, Greg Cottrell commented “We’ve worked hard over the past few years, listening to consumers and developing communication products that perform incredibly well. All of that means nothing if we can’t back it up with quality service.”

Since the inception of the off road intercom, Greg Cottrell has built an amazing and diverse business that services all audiences and professions

Their product line is used by top race teams and drivers you may already know. In the UTV scene, drivers like Branden Sims, Mitch Guthrie Jr., as well as Derek and Jason Murray to name a few all use Rugged Radios. In the off road racing scene, you’ll find other drivers sporting Rugged Radios such as RJ Anderson, Ricky Johnson, Luke Johnson, Jeremy McGrath, Cam Reimers and more. There’s no doubt Rugged doing something right. 

“It’s not just the equipment we offer,” Greg stated. “We back it up with top level service and support. We have a dedicated in-house tech support crew and we make every effort to be at every sanctioning body race event we support. We’re there for the fans and the race teams. We want to be sure everyone’s communications are working flawlessly.”

To back that up, Rugged Radios has probably logged more miles in travel this year than your odometer can count. Rugged Radios has traveled all over the southwest and covered major events in Kentucky, Florida, Oregon, and Wisconsin to name a few.  

With that attention, Rugged Radios always strives to be on the cutting edge, providing new products that are evolutionary and revolutionary.

Made from true carbon fiber, the AlphaBass has been blowing away the industry. It’s the first communication headset that integrates with your off road intercom and delivers outstanding audio performance.

“Next is our RM-60,” Greg said. “It’s a 60-watt radio that delivers almost 20% more power and distance than previously available models at a more affordable price.

Last, Greg discussed the new RRP660PLUS Intercom. The RRP660 PLUS is the latest offering from Rugged Radios, providing Bluetooth music streaming from your cell phone as well as the ability to connect and dis-connect from calls with the touch of a button on the intercom. You’ll never have to touch your cell phone in your pocket.

What’s hard for people to understand is that importance of the intercom. It’s the device everything connects to; headsets, helmet kits, and two-way radio – which can be added any time and is completely optional if you want to talk to other vehicles in your group.

Rugged Radio is doing something right and UTV owners, off road race teams, and powersports enthusiasts are waking up to the power of communications. With a single storefront in California and a massive website with over 1200 items, Rugged strives to do it right. To make it easy for consumers, the most popular offerings are available as complete kits with one-click ordering. Digging deeper, you can find just about anything else you need to repair, replace, or enhance any existing communications you might have.

Whether your passion is street, dirt, or snow, Rugged Radios is clearly the choice for communications. Product options and customer support lead the brand that Rugged has built, but nothing compares to the experience of actually having quality communications to make your ride more fun, improve safety, and add a soundtrack to your adventures. Be sure to check out Rugged Radios online or give them a call. There’s a reason Rugged Radios is the authority in communications. #ruggedradio #ruffstuff #ruffstuffspecialties

My 12 Days at KOH this Year!

By: Dan On: February 19th, 2012 In: Dan's Rants And Raves!, Events

Well I took a couple of days to recover but maybe I am finally over this nasty bug that has bothered so many of us. The final count of vehicles repaired was 198!

I guess I will start from the start and just let it flow. I know I will miss somebody or something so I will say sorry now if I forget and edit it later…

    Wenesday, Feb 1

We finally got out of the shop after a very long day of both normal work and loading the 2 trailers. We brought our 38′ race trailer and a 40′ gooseneck trailer and both were very full. We left after midnite and planned on stopping somewhere on the way for a nap. The nap spot turned out to be Fresno at about 4am, we found a construction site that we could block in so they would wake us up to get the hell out of the way! After an early wake up call we were back on the road and it was pretty uneventful, the trucks (2 Dodge Duallies) ran great and we were on the lakebed by 2:30pm.

    Thursday, Feb 2

Before we were unloaded we had a line of rigs needing help. Our work tent wasn’t even set up yet so we went to work in the dirt in front of where the tent would end up. Jay took charge of the repairs, sometimes doing the work himself, sometimes showing Perry (our Machinist) what he wanted done, and sometimes setting up the team with the tools so they could do their own work. Throughout the entire event I acted as the go between to keep the crowd off Jay’s back so we could keep working. At this point there were 5 of us down there. Myself, Ramsey, Jay, Perry, and my son Zack. We worked until about midnite and since there wasn’t a race the next day we called it an early night.

    Friday, Feb 3

We were told by the tent people ours would be up by 9am so we left that area free and Chris & JD from FOA worked in our tent attached to the trailer. It didn’t actually get set up til about 5:30pm so it was good we set them up with the alternate workspace.

Friday was a very busy day and we worked on at least 35 cars that day. We worked on both racers and spectators rigs alike, of course we set some priorities if someone was racing or had tech the next day but everyone got repaired. At many times during the day we were working on 6 rigs at the same time. I even did some welding Friday!

At about 6pm the rest of my crew arrived with Ty, JD, Brian, Bill, TJ, & Kami for a total of 11 bodies from Ruffstuff on the lakebed! Zack made a chicken stir fry and that was the first and only time we all got to take a break and eat together…

    Saturday, Feb 4

On Saturday we had a ton of Stock & Stock Mod cars needing something done to pass tech and a couple of major jobs in the tent, one of them was the entire rear half of a chassis that had broken off. We were swamped so I was relieved that team had the skills to do the work themselves if we could provide the space and tools.

Over the 12 days we did 8 of what I would call major repairs, repairs that if we did not have the Open Pit set up would likely have kept them from racing. I am very happy to say every one of those repaired rigs raced but one. That one had a major roll at speed 3 days later and just needed to be completey rebuilt and time had run out.

On Saturday my guys were getting sick, everyone was showing the signs. There had been a nasty flu/cold bug going around Sacramento and the weather in Johnson Valley didn’t make recovery any easier.

Saturday Night we loaded the 3 Dodges we had brought for the remote pits for Sundays race. It was sure nice to have Lincoln Electric as a sponsor. No more tiny generators powering a 110 box in the pits. We had 300amp 10.5KW generator powered welders in each truck, nobody was going to get a questionable weld!

    Sunday, Feb 5

We were all up early and out to the remote pits, Bill, Perry and I took on #1 and I was right, the long desert stretch took its toll on more than a few of the rigs coming by but I was almost suprised when the KOH volunteer said there were no more coming by noon. As we were loading up a desert truck limped in and we welded up his shock tower that had torn loose so we did at least one non KOH related repair while we were there!

We got back to the main pit and had 5 cars waiting for us as the other remote crews trickled in throughout the afternoon. The afternoon progressed and we started replacing two rear axle housings, they were planned ahead of time but definately major jobs. Perry took on Doug Bigelows and Jay did In the Pinks. While that was going on Bill and I took on all of the rest while they were busy.

I have to say Perry did a great job all week, machinists are welders & fabricators but he really had very little hands on experience but I couldn’t tell. Jay just kept pounding away at whatever he looked at and I am convinced he is one of the best in the business!

I cannot say enough about Torchmate and the help they provided to us (and anyone else that asked) with on the spot custom parts to match up the two housing replacements and anything else we needed. Lincoln Electric definately made a good decision buying Torchmate! They are two great companies supporting our sport.

    Monday, Feb 6

Another busy day with the LCQ/Qualifing loop the next day. I know this is getting a tad boring but we simply didn’t have any time when we were not busy.

Monday afternoon we flew Ramsey home because he was too sick and not getting better. Jay was also getting pretty bad and Zack had been off and on for the week so far. I was pretty determined I wasn’t going back but I was sicker that all of them!

Ty, JD, Bill, & TJ really stepped it up and filled in wherever needed and the four of them never got sick at all. Joe, one of my computer guys had flown in from North Carolina and was also filling in wherever possible. We also had one of our long-term customers jump in where needed, Travis Roarke from Kentucky and Roarke Fabrications (The guy that developed the Altas support ring). Travis welded for us for a day and a half or so when we were the sickest. We also had AJ Gardella from Bent Up with us a couple of days helping out wherever he was needed but mostly with a MIG gun in hand.

    Tuesday, Feb 7

On Tuesday I sent Zack home on a plane, he was almost over the flu when we left Sacramento but Johnson Valley just isn’t the best place to recover in February and he still hadn’t.

It slowed during the qualifier as so many people went out to see it or were in it but it picked right back up later in the day as people were needing to fix what broke during their run. We did fix 9 or 10 spectators rigs during the lull.

    Wenesday, Feb 8

Wenesday was more of the same but starting to get some urgency involved. We had a hand in helping many of the bigger names this year and I think I have figured it out. Last year was our first doing this and many teams still brought everything to be able to do it themselves. They simply were not sure we could do what we had promised. After last year and after the addition of Lincoln Electric to our sponsor list they knew we were ready and able to help AND we had better equipment than they did! Those guys did almost all of the work themselves but they were very happy to have some power in the welding machine they were able to use. I was not going to tell Jesse Haines or Adam Scherer we could do it better, they are both as good as any welder I know! But it is nice to have them ask if I would do something different, they were both open to any ideas we may have had.

    Thursday, Feb 9

With tech and all the last minute repairs we were swamped again.

We had one particular problem that was an all day PITA but should have been 2 hours. Heavy Metal Concepts had blown out the front R&P on one of their camera cars and needed it replaced. It was a Cherokee D30, pretty simple right? Well nobody on the lakebed had the 1 7/16″ socket required for a D30. Jay had brought his entire gearset toolkit but he dosen’t ever work on D30’s so he didn’t have one and nobody was racing on one so it simply didn’t exist! In the end, with Torchmates assistance we made one. It added several hours to the job but we were able to do it and now Jay has a very strange and unique 1 7/16″ socket in his toolkit.

    Friday, Feb 10, Raceday!

We were up early again for the remote pits. This time Jay was at #1 with Ty & JD, I was at Main with Perry & Joe, and Bill & TJ were at #2.

We all had relatively uneventful days, Jay welded on 2 cars and we welded on 2 also at main. Bill was busier at #2 welding on 6 and there til midnite helping make sure everyone got out. We were done at 6pm and Jay 8pm.

We worked on 7 or 8 more that evening to help get them home and that was that, another year in the bag! We spent most of Saturday loading the trailers and got a room in Yucca Valley and drove home Sunday, we were just too tired to make the drive Saturday.

After proofreading this I see I have missed 2 very important people from my crew. Brian & Kami, Brian was racing co dog for Travis Carpenter so he was pretty involved with him most of the week but he found the time to work in our booth in the vender tent. Kami arranged all of our food and worked in the vender tent when she could. They are the heart of our shipping department and a major part of Ruffstuff Specialties!

I also cannot forget all the other sponsors we had to make this happen the way it did. I am going to list them and explain a little about what they did to help both us and the cars that needed us.

Lincoln Electric – I have had a few days to really think about our time down there and I have to say we could not have done what we did this year without Lincoln Electric. They were the cornerstone of our operation and I am very excited at the prospects for the future for Lincoln in offroad racing of all kinds. Lincoln Provided us with over $30,000 worth of equipmant to work on your rigs with, all shiny and new!

Team Tube (West Coast Tubing Supplier) – Jon at Team Tube in Sacramento provided 26 sticks of tube in all sizes at no cost, over $3,000 worth at wholesale. Jon helped us last year also but when I called him this year all he asked was how much!

Rugged Radios – Greg at Rugged Radios helped us again this year too, last year we got 3 hand helds and this year he provided 3 base station radios, you couldn’t ask for a better company to deal with!

Powertank – Steve at Powertank has also helped us 2 years in a row with the best air supply you could ask for. We ran all our impacts for 12 days off 3 large tanks!

Harris Welding (Northern Cal Welding Supply) – Ernie at Harris gave me 16 bottles of various gasses at no charge and without question. Harris is headquartered in Sacramento and they understand just how big the Rock Crawling market is and they support it!

D&D Metals (One of our lazer cutters) – I told Dave we needed some plate for custom parts and he delivered me 5 sheets of various sizes to fill the need, again at no charge!

And of course FOA, a company that has certainly had plenty of challenges lately with their factory burning down. Without the support and encouragement of Chris at FOA I would have never taken this on in the first place! I am also happy to report that they are back in production at their new base of operations!

These companies support you so you should support them! Talk is cheap, these companies actually do something, that is reality!

Had a few arrivals today!

By: Dan On: January 27th, 2012 In: Dan's Rants And Raves!

Pretty new Red boxes!

And what was inside was pretty cool too!

5 out of 9 are here, the rest should be here tommorrow 🙂 No playing around, Lincoln Electric dosen’t like to do it in half measures, each our 3 pit trucks will have one of those big boys set up with a wire feeder!

Some big news for Ruffstuff!

By: Dan On: January 27th, 2012 In: Dan's Rants And Raves!

Ruffstuff Specialties is proud to announce the latest addition to their KOH family!

1/17/12 9am: This morning Lincoln Electric announced they will be participating in the Open Pit Program put together by Ruffstuff Specialties/FOA Suspension to support racers and spectators alike for the King Of The Hammers (KOH) series of events happening in early February in Johnson Valley, CA.

Mickey Holmes, Lincoln Electric’s Manager of Sports Marketing stated: We have been looking long and hard at Off Road events and we think this is the right time to commit! We could not have a better partner than Ruffstuff Specialties and FOA Suspension with their experience at providing this type of service. The Welding and Plasma Cutting equipment we are providing will be the best on the lakebed and racers and spectators alike will also have 9 days to test new equipment in one of the most desolate environments on earth!

Lincoln Electric will be joining an experienced cadre of Rock Crawling/Desert Racing companies already involved such as Solid Axle, Jrat Offroad, Torq Axle, Power Tank, Rugged Radios, Baja Designs, Team Tube, Giant Motorsports, and Branik Motorsports in the Open Pit.

Ruffstuff Owner Dan Fredrickson stated, “With the addition of Lincoln Electric we can provide the type of on the spot service we need at the main and remote pits, large, truck mounted welders that can perform a repair you can be certain of its integrity. He went on to say that this is a unique motorsport, the majority of Rock Crawlers build their own vehicles and are welders themselves and with 230 racers and 20,000 spectators in Johnson Valley for the week it is the place to be if you are a welding manufacturer. Where else could you find 15,000+ welders in one place, not at a NASCAR race!”

All services are Free in the Open Pit Format Developed by Dan and Chris(FOA) and cover everything from shock tuning to major welding repairs. They also have the resources to repair just about anything else that might break or need adjustment. They will be available 24/7 for 9 days starting Thursday the 2nd. There are no restrictions to this service, anyone that asks will be assisted.

2011 SEMA show

By: Garett On: November 8th, 2011 In: Dan's Rants And Raves!

This was the first time I went to the SEMA show in 5 years. In years past the show was way too disorganized and at least 2/3’s of the time was wasted walking and walking through aisles and aisles of spinning hubcaps. Simply something I didn’t need to see.

I had heard that they finally decided to get organized so I got on the plane and visited Las Vegas. First off, I should let you know I really dislike everything about cities and Vegas has always been over the top in every way so it always gets my mood off to a bad start. This trip was no different in that respect and worse in many ways since I had last visited. The last time I was there it was all about gambling and everything else was pretty much a giveaway. When the hell did that change? Now everything about Las Vegas is expensive, no more $1.09 breakfasts’ that were actually good, no more $1 beers to keep you hanging around. Thats all the old Vegas, in the new Vegas any meal is a minimum of $15 and a single beer is $8… Well, this isn’t about the SEMA show so I will let it go…

The SEMA (Specialty Equipment Manufacturers Association) show is all about anything automotive, anything!

They have now subdivided the show into many sub-sections that all have their own buildings. Of course the 4×4 & Offroad building was my first destination but I was a bit let down by what was considered show worthy. Yes, there were a ton of Rock Crawler and Desert Racing rigs but very few were attached to anything I was really interested in seeing. What I did see was big lift manufacturers for street trucks. Sure, all the Shock guys and the Wheel & Tire guys were there. Companies you see in the National Media were there in force but for the most part they are not really the innovators. I think that needs to change, perhaps we will have a booth next year. Another answer just might be that this is a wholesale only show and most of the smaller companies are retail only sellers.

Anyway I went on to and spent alot of time in the Tool building, mostly just learning how to do some new things I was interested in and pricing some new equipment. I had some good talks with Lincoln, Miller, & ESAB, all very good welding machines and we now have 8 welders in the building and all from different manufacturers so a little continuity is in order. I do remember in the not too distant past when just having 1 – 250 amp welder was a good thing and now we have 4 MIGS in daily use and 2 backups and a couple of big TIGS…

While I was wandering I had enrolled Garett (Our GM) in a couple of IT related classes and when we hooked up for lunch he was over flowing with new ideas so that was a success. We spent most of our free time talking with other company owners & managers, also quite a few of our wholesale customers. Over the next couple of days we took the time and saw the rest of the show and to be honest I am always impressed with the Hot Rods! This year was amazing and it always makes me wonder if I picked the wrong side of the business…