Processing time is currently 7–10 business days due to high order volume.
Give us a call, we are ready to help!
1-916-600-1945

Toyota 22R/22RE Motor Mounts

Part Number: R1626-Kit-1
Shipping Weight: 4.2 lb
$115.00
Shipping calculated at checkout.

Description

Toyota 22R/22RE Motor Mounts

Keep your Toyota engine secure and running smoothly with our motor mounts. Replacing worn or broken mounts will reduce vibration and noise, and improve overall performance. Base plate is made from 1/4" steel and the bent section is made from 3/16" steel.

*These mounts will transmit more vibration throughout the vehicle since they are more solid than the factory mounts. We highly recommend using these mounts if you are using solid transfer case mounts*

Includes:

  • 2 - 1/2" x 1.68" Inner Sleeves
  • 4 - Single Replacement Bushings
  • 2 - 3" x 1/2" Bolts with Nylock Nuts

Fits:

  • Pickup and 4runner: 22R/22RE, 88-94 V6 3.0
  • Tacoma: 95-04 2.7 and 3.4* Some customers have reported these mounts lowering the engine which may cause fan interference issues. Others have reported these work without issue. Use at your discretion
Sold in pairs
Prop 65 Warning Icon
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Customer Reviews

Based on 7 reviews
100%
(7)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Marvin
Mr.

I just purchased these mounts because I have the 3rz in my toyota T100 and the OEM mounts were discontinued. The OEM tacoma mounts uses a 0.75" stud as the bracket was steel and the one for the T100 was a much thicker cast aluminum. So there was really nothing that would fit other than to make something custom.

After some searching I found these mounts had a 1 1/8" stud so it was a perfect OEM fit. Customer service gave me the dimensions I needed so making sure it was a proper fit wasn't difficult.

The only issues was the bushing lips were a super tight fit against the top plate but nothing a bit of dielectric grease didn't fix. Awesome product at an awesome price!

M
Matt
Perfect fit for 3.4

Installed these in my 1st Gen Tacoma. 3.4... Worked/fit perfectly. These are a definate upgrade over factory. Quality is what I've come to expect from Ruff Stuff.

C
Christopher d Erwin
Prefer these over stock anyday

These helped realign my motor and stop alot of vibration on gravel roads. Perfect up grade right before hunting season. 3 truck now Ive upgraded with these

A
Alex Noll
Beefy

I bought these, due to the fact my newly acquired truck had a broken mount.

I know I won't be bothered by broken motor mounts again! They took a little time to get them lined up due to the drivetrain sitting funky in my truck but I wouldn't fault the mounts because of it. There is a little vibration in the truck due to locked out trans/tcase mounts and these, but I'm not worried about it.

T
Todd Allen
These will work the 3.4 motor!

After doing some research and comparing these to a lesser company's motor mounts that are marketed for the 3.4 V6, I decided to take chance to see if these would work for my truck. Both mounts were identical aesthetically, but these were just built better. These will bolt directly in, with no mods, to a 3.4 motor and corresponding vehicle (Mine is a 95 Tacoma). I have only logged a couple hundred miles since the install, but the are working great so far. Vibrations are a lot more noticeable, but not unbearable if your truck is only a weekend wheeler.

Market these now as also being compatible with the 3.4 motors to give these Tacoma (and 4Runner) guys more options!

12
Back to top