Give Us a Call, We Are Ready to Help!  1-916-600-1945

1.25" Hex Head Tube Adapter Right Hand 1.5(ID) 12(TPI)

Part Number: R1425
Shipping Weight: 0.5 lb
$21.00
Shipping calculated at checkout.

Description

1.25" Hex Head Tube Adapter Right Hand 1.5(ID) 12(TPI)

This tube adapter is built for folks who want to do it once and do it right. Designed for 1.25” heim joints with 12 TPI right-hand threads, it fits perfectly into 1.5” ID tubing — ideal for .120" or .250" wall DOM.

We added a 1.5” hex head so you can easily adjust your links with a wrench. No more vice grips or fighting to get your rig dialed in. Right-hand thread means it pairs with a left-hand adapter to let you adjust link length without removing anything — just loosen the jam nuts and twist.

Each adapter is machined from solid 1020 steel, right here in the USA.

They are sold individually but we can fit a ton of them in a small flat rate box!

*Tips to help prevent any seized or warped threads:
Correctly adjust welder settings and start your puddle on the tube. (Too much heat will warp the threads)
Do not weld the tube adapter with the rod end threaded inside. (The two pieces cool at different rates and will lock them together) Wait until everything has completely cooled before threading your rod ends into the adapters

Prop 65 Warning Icon
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

Customer Reviews

Based on 4 reviews
100%
(4)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
R
Romeo
Awesome Tube adapter/ threaded bung?

The quality of the threaded adapters from RS is second to none! These work perfectly as they should every time, PERIOD... I've got RS's 1ton steering, brackets and these and have no complaints. A great company with amazing products.

T
Tim
Amateur

These are a good design. The flats are almost 1.5" long, plenty of room to get a big wrench around. The adapters are hex shaped, which makes them easier to tighten on the rig than others' adapters that only have two flats ground into the insert. The inside threads stop near where the tube gets welded, which should also minimize any distortion due to too much weld heat.

C
Colin
1.25" hex head tube adapters

After looking around at a number of options for my suspension link ends, I opted for these adapters and they are BEEFY. Having a hex end was important to me and these provide a ton of area for getting a wrench on to hold the link while tightening jam nuts.

J
Jeremy Greiner
1.25" hex head tube adaptor

Ordered these hex head tube adaptors for my control arms, and once fit up...area of weld was perfect size depth to be Tig welded. Can be mig welded, but I prefer to Tig small parts. OD of hex head is same Size as the OD of the tube. Highly recommend.