Home Blog Contact Us About Us Jeep Parts & Accessories Where we shop Search Login View Cart (0)
Home > AXLES & AXLE PARTS > Brake Products > Disc Brake Adapters > Bolt on Disc Brake Brackets

14 Bolt Disc Brake Brackets (C&C Hubs on an SRW Axle)

14 Bolt Disc Brake Brackets (C&C Hubs on an SRW Axle)

These are the 14 Bolt Brake Brackets for the fairly common swap of CNC hubs being put on a SRW full float 14 bolt Axle ('73-87) to narrow the overall width. They are the same as our standard Disc Brackets with the exception of the offset needed to position the caliper correctly on the flange. They are 3/8" Plate steel bent to the correct offset and bolt right up! These make the 14 bolt Disc Brake Conversion easy! They come in pairs. If you think about these they MUST be bent or machined, anything else will NOT fit. They still use the '75 Chevy 3/4 Ton Rotors & Calipers. After '99 all bets are off, the newer model 14 Bolt axles have a variety of patterns & offsets, use a weld on bracket for a newer 14 Bolt axle.

These are not for Dual Rear Wheels, they are made for people running that axle with single rear wheels.



*NOTE* If longer studs are needed, usually dually studs are long enough or Dormin #610-301. Double check stud diameter, the rotors recommended for these brackets require a stud with 5/8" knurled diameter with 9/16" lug diameter or they will need to be drilled for larger diameter studs. Be sure to have minimum 5/8" lug nut thread engagement

NAPA Part numbers for '73-'87 3/4 Ton Front, 4x4, Chevy Calipers and Rotors:

Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers

OR

LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers

Rotor Only - 4885677 - all years

Customer Reviews
Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 1 Reviews
Write a review

5 out of 55 out of 55 out of 55 out of 55 out of 5 great looking product
By Sean Kammerer in CA on 7.16.2013
Ordered them during their 4th of july sale . Great service and product didn't have any clean up to . And surprised it even comes with hardware . Awesome jobs RUFF STUFF. Will be ordering more.

Questions and Answers

Ask a Question

Name:
Email:
Question:

David G. on 11-11-2017 Asked: Will these brackets work on a Semi Float 14 bolt gm corporate, the slip on rotors are held on by the wheel just like the front rotors on the newer vehicles right?

Answered: Unfortunately they will not work on the semi-float, they are installed behind the hub.
Price: 
$50.00
Rating:
5 out of 55 out of 55 out of 55 out of 55 out of 5 1 Reviews Read
Part Number: 
14CCSRW
Shipping Weight: 
5.50 pounds
Quantity: 


***ADD BRAKE LINE TABS***:





Customers who purchased this product, also purchased:
Brake Line Tab Bolt On - 4 Pack
Weld washers, 4 sizes, Set of 6
Ruffstuff Logo
14 Bolt Simple Swap
14 Bolt Disc Brake Brackets for Single Rear Wheels (SRW)