Home Blog Contact Us About Us Jeep Parts & Accessories Where we shop Search Login View Cart (0)
Home > STEERING COMPONENTS & KITS > Steering Accessories & Maintenance

3" Drop Pitman Arm

3" Drop Pitman Arm

This 3" Drop Pitman Arm is built for Crossover and High Steer Steering Set Up. The arm is meant to be used with 2WD Steering Boxes or with 4WD Steering Boxes with 2WD Sector Shaft Installed. Arm has GM Taper for ES2027L or ES2026R. 32 SPline, NO Master Key (Index-able in any Direction) It will replace arms with 4 Master Keys without any trouble. Reamed for 1 Ton High angle Tie Rod Ends only.


This arm will bolt up to the below listed jeep boxes but are about 1" longer than OEM. Double check clearances with your panhard, etc
1984-2001 Jeep Cherokee (XJ)
1997-2006 Jeep Wrangler (TJ)
1987-1995 Jeep Wrangler (YJ)
2004-2006 Jeep Wrangler (LJ)

Drop pitman arm helps reduce steering linkage angles on lifted vehicles. Recommended on all Jeep Wranglers running up to 3.5" of lift and jeep Cherokees(XJ) with stock suspensions, has 3" drop from a flat arm. Forged from high strength steel.
Customer Reviews
Average Customer Review: Not yet rated
Write a review

There are no reviews

Questions and Answers

Ask a Question

Name:
Email:
Question:

Ryan on -- Asked: how long is this pitman arm?

Answered: About 6 1/2" on center
Karl T. on -- Asked: Is this for a RHD?

Answered: As far as I know there are no differences in the sector shaft spline for RH or LH drive. Just be sure you have a box from one of the listed vehicles for this part
Tony on -- Asked: What is the spline ID?

Answered: About 1.2"
Mike on -- Asked: What is the center to center length on this

Answered: It's about 6 1/2"
Justin R. on -- Asked: Can this be used on 78 f250 4x4 steering box

Answered: This is for use with the Saginaw steering boxes with 36 splines, or 32 spline with 4 key ways. These boxes were found on many different manufactured vehicles, so you would just want to confirm that was what Ford was using at the time.
Price: 
$51.50
Part Number: 
R1848
Shipping Weight: 
2.00 pounds
Quantity: 






Customers who purchased this product, also purchased:
Y Link Steering using GM 1 Ton TRE
Tapered Steering Knuckle Insert 2 Pack
The Cure!
7/8" x 18TPI RH Tube Adapter 1" ID HEX
7/8" Heim Steering Kit