Requires single steel wheel minimum 16" with a maximum 4" back spacing. For Sterling axles 84-97 with 8x6.5 lug pattern. Does not work with metric lug pattern
Here is an easy bolt on bracket for the full float SRW Sterling axles. This one also uses the GM Caliper for the 73-87 3/4 Ton 4x4 Front with the MKD153 pads.(We use GM brake parts
because they are 1/2 the cost of the Ford and are less expensive than the wedge system. The Rotor is a 96 Ford E350 Van Rear rotor (NAPA#4886799). These were a long time coming but totally worth the wait. However there is of course an exception to the rule here. In '94 Ford changed the inner bearing width. To use this with the later years a 1/4" spacer may be required (included with brackets). All of our brake brackets are sold in pairs.
Mounts outside of flange closest to wheel
Questions and Answers
Mike O. on -- Asked:
Will these work on a 97 f-350 4x4 dually?
The 95 and later Sterlings we have found need spacers for the brackets, and the calipers do not clear the inner dually wheels unless you are running a 19.5" or larger wheel.