Home Blog Contact Us About Us Jeep Parts & Accessories Where we shop Search Login View Cart (0)
Home > VEHICLE SPECIFIC > Ford > Early & Late Ford Bronco & Full

Universal Shackle Flip Kit

Universal Shackle Flip Kit
We need a couple of questions answered before we can make these for you.

PLEASE USE PICTURE TO FIND NEEDED DIMENSIONS

A= What is the distance between the frame and the inner side of the bushing in the leaf spring?"

Measurement A may be no greater than 3 1/2" and no less than .75"

B= How wide are your leaf springs at the bushing?

Measurment B can be no smaller than 2.5" (for 2" wide spring) and no larger than 4"

C = 4.5 inches and we do not have an option to change.


PLEASE CONTACT US FOR SHACKLE FLIP KITS THAT NEED TO HAVE A MEASUREMENT OF GREATER THAN 2" FROM THE FRAME TO THE END OF THE BUSHING.

We have done away with the "female style" shackle receiver end and went with a much stronger design. This design allows the use of a non brand specific loose shackle. We suggest welding them on, but if you decide to bolt them on, you will have to drill 4 holes in the frame because these do not fit any stock bolt pattern.

The bushing sleeve is 2" x .25 wall DOM and is attached on four sides to the 1/4" plate torsion box mounting bracket. This enclosed design eliminates the need for any additional gusseting other kits require. The Bushings themselves are 1 1/2" in the minor diameter so you can flex them hard without tearing up the bushings and the bushing shoulder is 1/4" thick for the same reason.

If you intend to bolt them on we would recommend removing the gas tank to install them They mount through 4 holes you need to drill and after removing the gas tank (if necessary) should take no more than 45 minutes to install. The Brackets are 4 1/2" - 6" over stock depending on shackle length used. You should always use a shackle length that is ideal for you chosen springs.

Everything in the picture is included, on the shackles we offer either a 4",5",6",and 7" long.

To answer these questions either call or put it in the note field, if we do not see the note we will call you. These are custom made but can usually be completed as soon as two days.
Price: 
$195.00
Rating:
5 out of 55 out of 55 out of 55 out of 55 out of 5 4 Reviews Read
Part Number: 
UNFLIP
Shipping Weight: 
20.00 pounds
Quantity: 


Measurement A:

Measurement B:

Shackle Size:
4 INCH
5 INCH
6 INCH
7 INCH





Customers who purchased this product, also purchased:
GM U Bolt Plates (2.5" Springs)
Shackle-Large 6"
Ruffstuff Logo
Bushed DOM Sleeve
U Bolt, 3 3/8" X 5/8" X 10"

Customer Reviews
Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 4 Reviews
Write an online review and share your thoughts with others.

5 out of 55 out of 55 out of 55 out of 55 out of 5 The Bee's Knees, 2.25.2017
Reviewer: Alex Arteaga (Canton, OH)

Although I the parts came later than I wanted, The flip kit was exactly what what I needed. The parts are perfect and some might say overbuilt its better than underbuilt! I cleared another inch and improved my pinion angle and couldnt be more pleased. I've got a few more projects in the works and will be using nothing but Ruff Stuff products. A note worthy fact, 9/16 by 4.5 bolts are not easy to find. If you do go with the 9/16 bushing make sure and get yourself some bolts in the harware section of the site. Not even Summit had them in stock. The Best fabricating products hands down.

 

5 out of 55 out of 55 out of 55 out of 55 out of 5 WOW. I am impressed!!, 3.26.2015
Reviewer: Christopher Ferrari (San Jose, CA)

I planned to fabricate a set before finding this RuffStuff kit. These are beefy!! Excellent quality. Built to custom dimensions and shipped within a few days; definitely a pleased customer.

 

5 out of 55 out of 55 out of 55 out of 55 out of 5 OMG Heavy Duty, 5.20.2014
Reviewer: Christopher Durben (Peyton, CO)

I've bought lots of stuff from Ruff Stuff and know of their quality but dang. I'm going to have to upgrade the rest of my truck now cause it is the weak link. I love this Company would recommend to everyone.

 

5 out of 55 out of 55 out of 55 out of 55 out of 5 Worth every penny, 1.9.2013
Reviewer: Unknown (, GA)

Got these installed on my Bronco. Perfect. The welds were excellent and the metal is REAL THICK. Worth buying!!!