3 Link Kit with 1.25" Heims
*Does not come with DOM Tubing, DOM Tubing is available here.
NOTE: All link brackets have 9/16" holes. If the option to choose a larger bolt size is selected, the bracket holes will need to be drilled to match.
- 3--RH 1.25" Heims, jams and tube adapters
- 3--LH 1.25" Heims, jams and tube adapters
- 12--High misalignment spacers
- 2-- 7/8 heims for panhard with misalignment
- 2--Panhard brackets of your choice
- 2--Lower axle 0 degree link brackets
- 2--Chassis link brackets
- 1--Upper axle link tower
- 1--Adjustable upper link or 3 leg link (The 3 leg
link fits better on a narrow frame).
- 1 - Bolt kit
We have everything here to create a 3 link suspension, front or rear, and not low end stuff just to be cheap either! The kit is wrapped around 6 of our 1.25" Heat Treated Chromoly Heims with High Misalignment, Zinc Plated Jam nuts, and 1.5" Tube ID Weld Bungs and another set of the same in 7/8" for the Panhard. We add our Chassis Link Brackets, a 10 degree Adjustable Axle Link Tower, a 10 degree Frame bracket for the 3rd link, the Axle Lower Link brackets. We finish the Kit off with the Panhard setup, an Axle Offset panhard Bracket & the Frame panhard (inside or outside).
We now make adding the DOM tubing for your links an option, but remember that 2" x .25" wall DOM weighs - 5lbs a foot so check your prices locally before you decide to add the Link & Panhard Material(DOM)!
If you need to change anything give us a call and we can mix & match til its right for you!
Tri Flow is the only product we recommend to service our rod ends, use of other products such as WD-40 or Blaster is never recommended and will void any warranty