Secure Checkout
Free Shipping On Qualifying Orders Over $250!
Your Shopping Cart Is Empty

Secure Checkout

SKU: R1306 7/8" Heim Steering Kit

7/8" Heim Steering Kit
Click image to zoom
Purchase 7/8" Heim Steering Kit
  • 7/8" Heim Steering Kit

  • ★★★★★ ★★★★★ 20 reviews
  • Part Number: R1306
  • Shipping Weight: 38.00 pounds

  • $407.12 $305.34 $407.12Save On Complete Kits

  • Upgrade to adjustable threaded tube bung?:  
    Tie Rod Tubing Length:  

RuffStuff 7/8" Heim Steering Kit

This is your not so basic steering setup that uses 7/8" heims with easier adjustment & much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms. The arms or knuckles would need a 3/4" bore. The adjustment is easier because we add Hex Head weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench, which will scar the tube and if too deep, cause a major stress riser. Not to mention what it does to the paint... These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and 7/8" Ruffstuff Heat Treated Chromoly heim joints.

Kit Includes:

One of the unique things about this setup is the Safety Misalignment. We combine the misalignment you need with the Safety Washer you also need, eliminating a join point which is a potential stress riser and an obvious shear point. We do not provide the 3/4" bolts you will need. You must determine the length you need and it will vary with the thickness of your High Steer arm & Pitman Arm.


  • This is a do it yourself style kit that requires welding by a competent person with the right equipment, don't skimp, do it right!
  • You will need to check clearances with the steering at lock to see if you need to add any bends before you cut it down to clear diff covers, sway bar mounts, etc
  • We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!

Additional Products you may need to install this kit:

Write Review
★★★★★ ★★★★★
4.90/5 Stars out of 20 Reviews
Pages 1   2   3   4
Verified Buyer
1985 Ford Ranger Dana 44 SAS
Spencer Ramsey (Talent, OR, US) | May 11th, 2020
This was an awesome kit for my axle swap on my Ranger. This kit is BEEFY it is awesome and I couldn't be happier!
Verified Buyer
One of the best upgrades I've done.
Dylan (Los Angeles , CA, US) | August 29th, 2019
When all the stock steering linkages were worn out on my Jeep I figured this would be a fun upgrade. They give you plenty of DOM tube to fit any need, and it's thick stuff! The heims are what you'd expect from Ruff Stuff, amazing finish and smooth operation. I've had this kit on for the better part of a year and drive my Jeep on the highway to Johnson Valley and up the 395,and haven't had a single issue.
Verified Buyer
Quality product and nice looking finish
Alex Wickwar (Fort Collins, CO, US) | August 21st, 2018
This steering kit provides the ultimate level of customization and durability. RuffStuff provides more than enough DOM tubing ensuring ease of fitment and installation. I've thoroughly abused it throughout CO and had no problems whatsoever. Highly recommend.
Verified Buyer
Christopher Segraves (Peoria, AZ, US) | August 12th, 2018
Fantastic product. These things are STRONG and provide positive steering. Zero concern about bending steering links now.
Verified Buyer
Awesome quality and strength
Seth sartore (Everett, WA, US) | February 21st, 2018
I have had this kit on my Jeep for 5 years and never had any fail or weakness. Heim joints are big and strong and amazing quality. Highly recommend!
  • 7/8" Heim Steering Kit

  • BleepinJeep | RuffStuff Specialties DIY High Steer Kit

Questions & Answers

Ask a question

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to
Rate Product