SKU: R1557 Double Flex Front or Rear Lower Control Arm TJ/XJ/MJ/LJ PAIR
These correct the many weaknesses in the factory arms with greater strength and performance. Where other companies use cheap canister type joints we use our tried and true Heat Treated Heim joints. Where others use .188" wall tubing(some even use .120 wall) we use .25" wall tubing. Must use adjustable upper arms with these longer lower arms
"Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak, too short when adding lift and need replacement. I don't think you will bend ours and there are lots of advantages. These have 1.25" Heim joints for the lowers and 7/8' Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees). These are all Jig Built by Humans (Not Machines) here in Loomis California with steel made in Alabama or Chicago."