Panhard Kit / TrackBar

Panhard Kit / TrackBar

If you have any lift at all then your axle has shifted position towards the driver side and if your vehicle does not have an adjustable panhard bar then you will need to replace it to get the axle centered. Some people might just change the panhard bar or the brackets, in most cases you will need to replace both in order to get the geometry correct.

This kit ties it all together with all the pieces in one place.

We start with our Panhard brackets, you will need to choose whether you want the axle offset or centered bracket. It is really a space consideration, if you have the room you can use the centered, if space is the concern choose the offset bracket to get the panhard out of the way.

The next choice is for the frame mounting. If you are using a stock width axle most of the time you will use the frame inside bracket. When going fullwidth you will need the frame outside bracket to get the length you need. You will receive:

• 43"of DOM tubing 1.5" O.D. X .25" wall
• Brackets for the frame and axle
• 1 pair of 7/8" Heat Treated Heims
• High Misalignments with a 9/16" Bore
• Hex Head Weld Bungs for faster adjustment
• 2 - Grade 8 Bolts and Lock Nuts