This is another one of our "million different uses" type products! Our Universal Tube reinforcements are meant to add wall thickness to your tubing ONLY where you need it! Great for tie rods, lower links, rock sliders, roll cages, and everywhere in between!
Only add wall thickness where you need it! Saves tons of weight and money versus building full sections out of heavy wall tubing.
The bending and welding makes this reinforcement harder than the tubing it is covering! No more denting tubes.
Replaceable! If you wear through the reinforcement simply cut along your weld to remove it and weld a new one on.
Easier and stronger than cutting out and splicing in new sections of cage or rock sliders if a tube is punctured or scraped through!
Fits on 1.5", 1.75", and 2"+ diameter tubing
46" length is long enough to cover most full-width axle tie rods from tube insert to tube insert
1-3/8" wide
3/16" thick (makes your .120" wall tubing 5/16" wall!)
David Kappelman (Burlington, KY, US) | November 28th, 2019
I am adding these to the bottom of 2” DOM traction bars for added stiffness and to act as a “rock slide”. These are awesome!. All you need is mock up, welding, and painting. I use weld thru primer until I am satisfied with fitment and function. They are then ready for paint or powdercoat!
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 