U-Bolt Plate Medium. These are designed with the standard 2.5" GM leaf spring in mind but will work great with a spring anywhere from 2.5" to 2.75" in width. These will fit an Axle of 2.5" to 4" in diameter. All of our U bolt plates have 3 spring pin location options. They are .375" HR P&O Steel plate and can work with .5625" (9/16) to .625" (5/8) U bolts, we recomend 5/8", why use a lighter piece of steel when you don't have too? These are sold in pairs.
Questions and Answers
Dave M. on -- Asked:
I'm putting some deavers under the rear of my truck and need to move the axle back about 3/4"-1" from the center pin. Will these work and to you sell the SMALL block to go between my d60 and the 2.5 springs? 98' Dodge 2500 single cab, long bed. Factory 60s, factory was 3" wide springs. Removing factory blocks and using 2.5 wide deavers. F49? Probably doing shakle flip if I can keep it low enough... 2550lbs over the rear axle. 39" tires. No lift rear... Thanks!
These will work if you are running 2.5" wide springs and are drilled in 1" increments.
We do not sell any leaf spring blocks or shims at this time.