With current order volume this product has a 5 day turn around time on select bushing sizes
The size of the Polyurethane bushing listed is overall, including the shoulder. These are the bushings we use with alot of our kits and are made for 1.5" diameter eyelets. We currently do not carry any other diameter
We can cut down the outer and inner D.O.M. sleeves to make different mounting widths between 2-4"
Questions and Answers
Fred on -- Asked:
I need to replace the poly bushings on my Ruff Stuff lower control arms for my TJ. What size bushings and sleeves do I need?
For these arms we use a thinner lipped bushing than what we have listed on the website. We can get you set up with these bushings over the phone for the same cost as the standard bushings.
mike on -- Asked:
Hi. are these sold as pictured? 2 bushings and a sleeve? Thanks!!
Yes, two bushing halves and one inner sleeve
Michael on -- Asked:
Trying to make sure I order the correct bushings for my leaf spring, and trying to make sure I get the correct measurements. I believe I need the inside diameter of the spring eye and also the width of the spring eye but I want to make sure I order the correct size the first time. Thank you...
Yes you will want to confirm both of those. Our bushings fit into 1.5" inside diameter spring eyelets and we include the 1/4" bushing lip in the overall width in our listings. Example: Most 2.5" wide springs will fit into a 3" wide hanger(including the bushing lip)
Adrian T. on -- Asked:
I have a aftermarket upper control armand was needing the rubber bushings what do I ne to measure the get the right size.
Measure the ID of the control arm to see what diameter bushing you need, then measure inside width of the bracket it needs to fit into