Home Contact Us About Us Jeep Parts & Accessories Where we shop Blog Search Login View Cart (0)
Home > BRAKE PRODUCTS > Disc Brake Adapters > Bolt on Disc Brake Brackets

Eaton HO52/72 Disc Brake Conversion Bracket

Eaton HO52/72 Disc Brake Conversion Bracket

Requires single steel wheel 15" with a maximum 4" back spacing This is something we have had for a long time, the 14 Bolt Bracket, that I just was unaware of the fact that they work on the Eaton Axles. The design is stronger by eliminating spacers therefore making them slightly lighter as well. Our brackets are 3/8" thick for strength and rigidity and it costs us less to make which we can pass on to you the customer. These are for a the 1965-72 Eaton Single Rear Axle housing and use 73-87 3/4 ton Chevy Calipers and Rotors. These bracket need no extra mounting hardware to complete the job and make the Eaton Disk Brake Conversion easy. Sold as pairs.

*NOTE* If longer studs are needed, usually dually studs are long enough or Dormin #610-301. Double check stud diameter, studs should drop freely into the rotor. DO NOT press studs into the rotor. If your hub has too large of studs you will need to drill the rotors to accept them. Be sure to have minimum 5/8" lug nut thread engagement

NAPA Part numbers for '73-'87 3/4 Ton Front, 4x4, Chevy Calipers and Rotors:

Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers
LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers
Rotor Only: - 4885677 - all years Brake line: H86572
Dorman part number for 9/16 wheel studs: 610-194
Customer Reviews
Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 2 Reviews
Write a review

5 out of 55 out of 55 out of 55 out of 55 out of 5 Great
By chance stitzell in OR on 3.7.2018
Received them a day early. Went in to the shop tonight and they fit perfect. Can't wait to drive the jeep with much improved rear brakes.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Eaton Brackets
By Tyler Porter in MI on 1.12.2016
Worked great, straight forward like a 14 bolt disc swap. Bought them for a buddys truck for his birthday and he was extremely pleased. Even eliminates the needed spacers in most cases, truly a great bolt on option!

Questions and Answers

Ask a Question


David V. on -- Asked: What is the measurement of the four bolt holes from center hole to center hole? This is on the Eaton HO52/72 Disc Brake Conversion Bracket (EHO5272). Thank you

Answered: It is a square bolt pattern that measures approximately 3 1/4" from front to back and top to bottom center hole to center hole.

5 out of 55 out of 55 out of 55 out of 55 out of 5 2 Reviews Read
Part Number: 
Shipping Weight: 
8.00 pounds


Related Item(s)

Customers who purchased this product, also purchased:
Brake Line Tab Bolt On - 4 Pack
Brake Line Tab Weld On
Ruffstuff Logo
GM U Bolt Plates (2.5" Springs)
Brake Line Clip 4 Pack