Home Blog Contact Us About Us Jeep Parts & Accessories Where we shop Search Login View Cart (0)
Home > VEHICLE SPECIFIC > Jeep Parts & Accessories > Jeep XJ Cherokee

XJ Front Frame Reinforcement Plate Kit

XJ Front Frame Reinforcement Plate Kit

You have been asking for these for a while and they're finally here - Front Frame Reinforcements for your Jeep XJ! Pair these up with our XJ Chassis Channel Reinforcements to get the strongest, stiffest unibody possible!

  • Add strength and rigidity to the critical area around your upper coil buckets, track bar mount, and motor mount.
  • Brings the front rails to ~1/4 thick, making the unibody thick enough to weld custom bracketry to without burning through and strong enough to handle tons of abuse.
  • Doubles as steering box mount reinforcement with pre-cut holes for the mounting bolts.
  • Comes in three pieces per side requiring less disassembly of your front end to install.
  • Slotted to allow easier and closer fitment against the unibody.
  • Slot welding helps distribute stresses throughout the entire reinforcement plate.
  • 3/16 thick laser cut plate.
  • Each kit includes (2) side plate sets

Customer Reviews
Average Customer Review: 5 out of 55 out of 55 out of 55 out of 55 out of 5 2 Reviews
Write a review

5 out of 55 out of 55 out of 55 out of 55 out of 5 Front frame reinforcement
By David Elliott in OR on 5.7.2018
Bought these for my Jeep. Great product. Would definitely recommend.

5 out of 55 out of 55 out of 55 out of 55 out of 5 Precision cut parts
By Jeremy Early in CA on 6.22.2017
Bought these XJ front frame stiffeners to go with my RuffStuff center frame stiffeners and they impressed me once again. Quality made parts. I will definitely be buying more parts from them in the future.

Questions and Answers

Ask a Question


Chris G. on 8-9-2018 Asked: Do they go far enough forward to cover gear box bolts

Answered: Yes, they are pre-drilled to mount the steering box. Factory bumper bolt holes are not drilled, so if you are still running this bumper you will need to drill mounting holes.
zachary K. on 1-18-2018 Asked: Do you have to redrill the holes for the front bumper mounts?

Answered: Yes, the ones we currently have do need the front bumper holes drilled.
Steven on 11-5-2017 Asked: Does one set do the inside and outside of the frame, meaning I would have to order two sets to do the inside and outside of drivers side and passenger side frame?

Answered: This plate kit is only designed for the outside of the frame. If you ordered a second set for the inside you would have to do some modification to the plate kit because it is not designed for the inside.
5 out of 55 out of 55 out of 55 out of 55 out of 5 2 Reviews Read
Part Number: 
Shipping Weight: 
21.00 pounds

Customers who purchased this product, also purchased:
XJ Chassis Channel Reinforcement
Ruffstuff Tshirt, Black
Ruffstuff Logo
Frame Outside Panhard Bracket
Panhard Kit / TrackBar