Adjustable Rear Upper Control Arm TJ/LJ/ZJ PAIR
Rear Upper Control Arms are the ideal replacement for your Jeep factory control arms. Whether you're repairing or correcting your Wrangler's castor geometry after lifting, these rear upper control arms will ensure a quality ride with more articulation. They're designed for 2.5"-4" inches of suspension lift and are ready for a painless installation. You will need to run our longer lowers as well to get the correct pinion angle and center the axle in the wheel well. The pair of arms come completely welded and utilizes your factory mounts! This kit uses larger 1/2" hardware compared to the stock 10mm (~1/8" larger) bolts so be sure to grab a 1/2" drill bit and replacement bolts before you get started on your project!
Kit includes everything in picture and comes fully welded!
- (2) 1.5" x .250 wall DOM Tubing
- (2) Poly Bushings w/ 1/2" Sleeves
- (2) 7/8" Heim Kits w/ 1/2" Misalignment Spacers
Write a review
Customers who purchased this product, also purchased:
|Adjustable Front Upper Control Arm TJ/XJ/MJ/LJ/ZJ PAIR|
|Single Flex Lower Front - Rear Control Arm TJ/XJ/MJ/LJ/ZJ PAIR|
|Limit Strap/Seat Belt Bracket|
|Ruffstuff 1.50" OD Steering Tube Clamp|
|Jeep XJ, TJ, LJ, ZJ & MJ Y Link 1 Ton Steering Kit|