Spare Tire Mounting Plate Multi-pattern
This is not your plain Jane Spare Tire Mounting Plate, it is the leader of the pack in the spare tire world! It is laser cut from 3/8" plate and fits 13 different lug patterns between two different plates (part numbers listed below to choose the plate you need). There is a 5/8" hole in the center that can be used to locate the plate and as a plug weld location. These need to be welded on- do not use a single 5/8" bolt to mount it!
All patterns are centered on the plate and utilize at least half of the wheel's mounting holes. The patterns have 1/2", 9/16", 12mm and 14mm holes depending on which one you choose. This allows you to mount the spare to the plate using inexpensive grade 8 bolts or drill them out and use studs if you prefer.
NOTE: SOLD INDIVIDUALLY
Choose the part number you need the following lug patterns:
| Part# |
Description |
Bolt Pattern Inches |
Bolt Pattern MM |
Hole Size in Plate |
| R2501 |
Can-Am |
4 x 5.39" |
4 x 137 |
12mm |
| R2501 |
Polaris |
4 x 6.14" |
4 x 156 |
12mm |
| R1214-01 |
Jeep YJ, TJ, LJ, XJ, MJ, and ZJ |
5 x 4.5" |
5 x 114.3 |
1/2" |
| R1214-01 |
Jeep JK, JL, JT, WJ, and WK |
5 x 5" |
5 x 127 |
1/2" |
| R1214-01 |
Jeep CJ and pre 1973 Wagoneer |
5 x 5.5" |
5 x 139.7 |
1/2" |
| R2501 |
Toyota Tundra/ Sequoia |
5 x 5.9" |
5 x 150 |
14mm |
| R2501 |
Chevy Colorado/Canyon (2014 and newer holes need to drilled to 14mm) |
6 x 4.72" |
6 x 120 |
12mm |
| R2501 |
04 and newer Ford F-150 and Expedition |
6 x 5.31" |
6 x 135 |
14mm |
| R1214-01 |
Standard Chevy / Toyota / Nissan 6 Lugs |
6 x 5.5" |
6 x 139.7 |
1/2" |
| R1214-01 |
Ford, GM, and Dodge full size trucks and SUVs |
8 x 6.5" |
8 x 165.1 |
9/16" |
| R1214-01 |
99 and newer Ford Super Duty trucks |
8 x 6.69" |
8 x 170 |
9/16" |
| R2501 |
Newer GM Full Size Metric Pattern |
8 x 7.09" |
8 x 180 |
14mm |
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 