Secure Checkout
Please click here to learn about our covid 19 procedures
give us a call at (916) 600-1945, we are ready to help!
Your Shopping Cart Is Empty

Secure Checkout

SKU: R2393 Dodge Dana 70 Rear Disc Brake Brackets

Dodge Dana 70 Rear Disc Brake Brackets
Click image to zoom
Purchase Dodge Dana 70 Rear Disc Brake Brackets
  • Dodge Dana 70 Rear Disc Brake Brackets

  • Not Yet Rated! - Leave a review
  • Part Number: R2393
  • Shipping Weight: 6.90 pounds

  • Quantity in Basket:  None

  • $55.00

    Sorry, we are currently Sold Out of Dodge Dana 70 Rear Disc Brake Brackets. Please check back later.

Please see below for certain Dodge axles this kit won't work with. Requires single steel wheel 15" with a maximum 4" back spacing. These are not for dual rear wheels, they are made for single rear wheel axles.

Here you are, an easy bolt on bracket for the Dodge full floating Single Wheel Dana 70 axles! This also uses the GM Rotor and Caliper for the 73-87 3/4 Ton 4x4 front with the MKD153 pads. The mounting holes fit the early and late 4 bolt flanges. All of our brackets are 3/8" thick for strength and rigidity and it costs us less to make which we can pass on to you the customer.

*NOTE* Double check stud diameter, studs should drop freely into the rotor. DO NOT press studs into the rotor. Dormin # 610-283.1 will work if you drill your hubs and rotors. Knurl must press into hub. If your hub has too large of studs you will need to drill the rotors to accept them. Be sure to have minimum 5/8" lug nut thread engagement

NAPA Part numbers for '73-'87 3/4 Ton Front, 4x4, Chevy Calipers and Rotors:
Caliper ONLY: LH - N4674, RH - N4673 - Both of these are LATER year part numbers
LH - N4597, RH - N4596 - Both of these are EARLIER year part numbers
Rotor Only: - 4885677 - all years
Brake line: - H86572

*We have discovered that some housings have different flange to hub offsets. We have not narrowed down if this applies to axles of a certain year or if its just certain BOM etc. Axles with BOM# 605590 and 605901-1 have been an issue. To ensure this kit works with your housing measure from your 4 bolt flange to the back of the wheel hub (the surface the wheel studs press up against). This distance must be about 5.68" to ensure our kit will work*

Write Review
No Reviews Yet!


Questions & Answers

Ask a question

Rate Product