Jeep Wrangler TJ Coil Buckets
These are a coil bucket replacement for the Jeep TJ when using the factory Dana 35 or Dana 44 axle. Our brackets are entirely .25" thick, both the plate and the tube. Ideally you would use these for a rust belt replacement or when swapping in a new axle and want to use the stock or lift coils in the same diameter.
The surface of the pad is 6 5/8" diameter and the OD of the locator is 2 1/2" so these are perfect for the TJ but can be used with many different springs also.
Note
- These should be welded on by a competent person with the correct equipment.
- Sold in pairs
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 