Shackle Hanger - Custom Width
*Bushings may be red depending on availability*
NOTE: THE CUSTOM WIDTH MINIMUM DISTANCE CAN NOT BE LESS THAN 2 1/4" OD. Custom width bushing DOM sleeves have about a 4 day turn around time depending on quantity
These are designed with an offset so you can pull them way back or all the way forward to your desired frame location. They will work great in a shackle reversal too with a ramp built in, this way you won't have to spend hours and hours drilling, reinforcing, and praying that the holes in the frame are straight.
Made of 1/4" thick steel plate and 2.0" x .25 wall DOM. This kit comes with bushings and sleeves.
Measure your springs with the bushings installed to determine which you need. All custom widths will be within .010" of requested size
They come unwelded and are sold in pairs.If you choose to include a shackle, it will come drilled to the sleeve ID you selected