SKU: R1602 Jeep Wrangler JK Adjustable Rear Lower Control Arms
Fully welded, bolt-in replacement Lower control arm for the rear of any Jeep Wrangler JK. Made with our famous 1-1/4" Heim joints on one end, and our DOM Poly bushing on the other, you get a blend of performance and comfort that will outlast any other. Tubing is 2" OD, 1/4" thick DOM that we sell with 3 and 4 link kits, it has been proven time and time again to withstand serious off-road abuse.
"Lets get this right out in the open, my math is not that great but I calculate these are at least 4 times stronger than stock factory control arms for the Jeep JK, TJ, LJ & XJ! The factory arms are weak, too short when adding lift and need replacement. I don't think you will bend ours and there are lots of advantages. These have 1.25" Heim joints for the lowers and 7/8' Heim uppers. The Heims allow for more than twice the travel (36 Degrees) of the factory bushings (~10 degrees). These are all Jig Built by Humans (Not Machines) here in Loomis California with steel made in Alabama or Chicago."