Dana 60 High Steer Arm Driver Side, Springless
Driver-side Dana 60 High steer arm designed to work easily with stock 4 stud knuckles, but also comes with a 5th hole ready to work with many aftermarket knuckles.
These are a spring-less high-steer arm, which uses a threaded stud and heavy duty washer to pre-load the king-pin bushing, and replaces the stock retention spring and cap. The threaded pre-load stud does come with a grease fitting to make regular lubrication without any disassembly easy.
For Offroad Use Only
The shoulder on some factory studs are too large for these arms.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov. 