(Image is not of exact product)
This is our JL/JT Rubicon cover that is not quite as aestheticaly pleasing as we would like. They were made of steel with mill scale when there was difficulty getting pickled and oil steel. They have been discounted to reflect this and can be cleaned up in a muriatic acid bath or I have heard of people having good results with distilled white vinegar with a little extra soaking time.
This is our basic differential cover, we see it as the only one worth making. The M210 is a variation of a Dana 44 front axle found stock on the Jeep Wrangler JL and Jeep Gladiator JT Rubicon Models.
- FULLY BACKED BY A LIFETIME WARRANTY
- Ring is 1/2" thick and the Cover is 3/8" thick
- Plate steel cover bent 8 ways
- Machined absolutely flat for a perfect fit
- All seams fully welded inside and out
- Optional bolt kit comes with (M8) 12 point bolts with washers
The differential cover is a 1 piece 3/8" (.375") plate steel cap bent 8 ways then welded to a 1/2" ring!. The fill plug is a generous 1" ID for easy fill and oil level check. After welding the mounting surface is machined absolutely flat for a perfect fit! This is for a fully welded Dana 44 M210 diff cover, ready to plug & play!
*DOES NOT FIT ANY OTHER DANA 44 MODELS OR REAR JL/JT AXLES.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
