Due to an increase in order volume, there is currently a 4-5 day turn around time for new orders. Thank you for your patience.
SKU: R1305 Y Link Steering using GM 1 Ton TRE
This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms, the taper is the standard GM 1 ton. These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are made for a 1 ton rig and are much larger than stock. Adjustment is easier because we add Hex Head TRE weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench, which will scar the tube and if too deep, cause a major stress riser. Not to mention what it does to the paint...
We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!
BleepinJeep - RuffStuff Specialties "Y" Link Steering Upgrade