Secure Checkout
give us a call at (916) 600-1945, we are ready to help!
Your Shopping Cart Is Empty

Secure Checkout

SKU: R1305 Y Link Steering using GM 1 Ton TRE

Y Link Steering using GM 1 Ton TRE
Click image to zoom
Purchase Y Link Steering using GM 1 Ton TRE
  • Y Link Steering using GM 1 Ton TRE

  • ★★★★★ ★★★★★ 30 reviews
  • Part Number: R1305
  • Shipping Weight: 41.00 pounds

  • $284.95 $256.45

  • Y link Reamed:  
    Add Adjustable Threaded Tube Bung?:  
  • In Stock

Y Link Steering using GM 1 Ton Tie Rod Ends

This is your not so basic steering setup that mocks the factory setup with easier adjustment & much stronger tubing. The kit can be used with stock steering position on the knuckle or High Steer arms, the taper is the standard GM 1 ton. These are stronger than stock because we use 1.5" X .25" Wall DOM tubing and the TRE's are made for a 1 ton rig and are much larger than stock. Adjustment is easier because we add Hex Head TRE weld bungs so a crescent wrench is your adjustment tool, not a pipe wrench, which will scar the tube and if too deep, cause a major stress riser. Not to mention what it does to the paint...

Important Note

  • Due to high demand please allow a 3-5 business day turnaround.
  • Requires welding by a competent person with the right equipment, don't skimp, do it right!
  • You will need to check clearances with the steering at lock to see if you need to add any bends before you cut it down to clear diff covers, sway bar mounts, etc

Kit Includes

We supply more DOM than you need because it is way too easy to make a mistake in your calculations and you can always cut tube, growing it back is the hard part!

Additional Products you may need when installing this kit:

Write Review
Currently Viewing Reviews with a rating of 4. Click here to reset.
★★★★★ ★★★★★
4.97/5 Stars out of 30 Reviews
5
29
4
1
3
0
2
0
1
0
Verified Buyer
Great product bad packaging
4
Steven Lund (Miramonte, CA, US) | June 25th, 2019
I ordered this kit for a Dana 44 swap I'm doin in my yj comes with everything you need and is almost over kill for my 35's I'm running but the packaging suck it came ups and the box was thin and busted open and the rod ends were beat to hell and damaged I had to clean up the threades just to get the jam nuts and weld bungs on lucky I have a machine shop that helped me out / Ruffstuff please fix your packaging ! All around great product we will be doin Business again soon
  • BleepinJeep - RuffStuff Specialties "Y" Link Steering Upgrade

Questions & Answers

Ask a question

⚠ WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Rate Product